3. Intel Quartus Prime Software Support
The Intel Quartus Prime design software supports the automotive-grade devices in the
automotive temperature range. The Intel Quartus Prime software provides a
comprehensive environment for SoC design. It also includes HDL and schematic
design entry, compilation and logic synthesis, full simulation and advanced timing
analysis, Signal Tap II logic analyzer, and device configuration.
To target an automotive-grade device in your design in the Intel Quartus Prime
software, follow these steps:
1.
Click Assignments ➤ Device. The Settings dialog box appears.
2. In the Family drop-down list, select your device.
3. Under Target device, select Specific device selected in ‘Available devices’
list.
4. In the Available devices list, select the appropriate ordering code.
Note: The Intel Quartus Prime software does not show the “N” suffix, which
indicates a lead-free device. For example, the 5CGXFC3B6U15A7N device is
shown only as 5CGXFC3B6U15A7.
5. Click OK.
The following automotive-grade devices are from the legacy device families and are
not recommended for new automotive designs.
• Cyclone III
• Cyclone II
• Cyclone
• MAX 7000AE
AUT5V1 | 2018.10.01
Send Feedback
Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus
and Stratix words and logos are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in
accordance with Intel's standard warranty, but reserves the right to make changes to any products and services
at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any
information, product, or service described herein except as expressly agreed to in writing by Intel. Intel
customers are advised to obtain the latest version of device specifications before relying on any published
information and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2015
Registered
