AUIRF6218S/L
10 www.irf.com
08/20/2012
D
2
Pak Tape & Reel Information
Dimensions are shown in millimeters (inches)
3
4
4
TRR
FEED DIRECTION
1.85 (.073)
1.65 (.065)
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
TRL
FEED DIRECTION
10.90 (.429)
10.70 (.421)
16.10 (.634)
15.90 (.626)
1.75 (.069)
1.25 (.049)
11.60 (.457)
11.40 (.449)
15.42 (.609)
15.22 (.601)
4.72 (.136)
4.52 (.178)
24.30 (.957)
23.90 (.941)
0.368 (.0145)
0.342 (.0135)
1.60 (.063)
1.50 (.059)
13.50 (.532)
12.80 (.504)
330.00
(14.173)
MAX.
27.40 (1.079)
23.90 (.941)
60.00 (2.362)
MIN.
30.40 (1.197)
MAX.
26.40 (1.039)
24.40 (.961)
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
AUIRF6218S/L
www.irf.com 11
08/20/2012
Ordering Information
Base part
number
Package Type Standard Pack Complete Part Number
Form
Quantity
AUIRF6218L TO-262 Tube 50 AUIRF6218L
AUIRF6218S D2Pak Tube 50 AUIRF6218S
Tape and Reel Left 800 AUIRF6218STRL
Tape and Reel Right 800 AUIRF6218STRR
AUIRF6218S/L
12 www.irf.com
08/20/2012
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its
subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and
other changes to its products and services at any time and to discontinue any product or services without
notice. Part numbers designated with the AU prefix follow automotive industry and / or customer specific
requirements with regards to product discontinuance and process change notification. All products are sold
subject to IRs terms and conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with IRs standard warranty. Testing and other quality control techniques are used to the extent
IR deems necessary to support this warranty. Except where mandated by government requirements, testing
of all parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible
for their products and applications using IR components. To minimize the risks with customer products and
applications, customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduc-
tion of this information with alterations is an unfair and deceptive business practice. IR is not responsible
or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for
that product or service voids all express and any implied warranties for the associated IR product or service
and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical
implant into the body, or in other applications intended to support or sustain life, or in any other application
in which the failure of the IR product could create a situation where personal injury or death may occur. Should
Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall
indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distribu-
tors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of
Defense, are designed and manufactured to meet DLA military specifications required by certain military,
aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified
by DLA as military-grade, in applications requiring military grade products, is solely at the Buyers own risk
and that they are solely responsible for compliance with all legal and regulatory requirements in connection
with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless
the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part
number including the designation AU. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IRs Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105

AUIRF6218S

Mfr. #:
Manufacturer:
Infineon / IR
Description:
MOSFET Automotive MOSFET 27A, 71 nC, D2Pak
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet