NX3L2267 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 18 June 2012 11 of 22
NXP Semiconductors
NX3L2267
Low-ohmic dual single-pole double-throw analog switch
[1] Typical values are measured at T
amb
= 25 C and V
CC
= 1.5 V, 1.8 V, 2.5 V, 3.3 V and 4.3 V respectively.
[2] Break-before-make guaranteed by design.
12.1 Waveform and test circuits
t
b-m
break-before-make
time
see Figure 16
[2]
V
CC
= 1.4 V to 1.6 V - 19 - 9 - - ns
V
CC
= 1.65 V to 1.95 V - 17 - 7 - - ns
V
CC
= 2.3 V to 2.7 V - 13 - 4 - - ns
V
CC
= 2.7 V to 3.6 V - 10 - 3 - - ns
V
CC
= 3.6 V to 4.3 V - 10 - 2 - - ns
Table 9. Dynamic characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for load circuit see Figure 17.
Symbol Parameter Conditions T
amb
= 25 C T
amb
= 40 C to +125 C Unit
Min Typ
[1]
Max Min Max
(85 C)
Max
(125 C)
Measurement points are given in Table 10.
Logic level: V
OH
is typical output voltage level that occurs with the output load.
Fig 15. Enable and disable times
001aak762
V
I
GND
nS input
nZ output
OFF to HIGH
HIGH to OFF
nY1 connected to V
EXT
nY0 connected to V
EXT
V
OH
GND
V
OH
GND
V
M
t
en
t
dis
t
en
t
dis
V
X
V
X
V
X
V
X
nZ output
HIGH to OFF
OFF to HIGH
Table 10. Measurement points
Supply voltage Input Output
V
CC
V
M
V
X
1.4 V to 4.3 V 0.5V
CC
0.9V
OH
