Document Number: 001-10261 Rev. *H Page 9 of 10
.
Document History Page
Document Title: CY2X013 LVDS Crystal Oscillator (XO)
Document Number: 001-10261
Revision ECN
Orig. of
Change
Submission
Date
Description of Change
** 504518 RGL 09/21/06 New data sheet
*A 2705638 KVM/AESA 05/13/09 Removed pull up resistor on pin 1, Pin 2 changed from NC to DNU
Added description of frequency range gaps, Removed frequency stability as a
programming option; added phase noise / jitter optimization, Max storage
temperature changed from 150 to 135C, Max junction temperature changed from
125 to 135C, Removed flammability and moisture sensitivity specs, Added
thermal resistance data, IDD increased (100mA to 120 mA), conditions changed,
and separate spec added for 2.5V supply, Changed IDD values and conditions,
Standby current changed from 1mA to 250A, Changes to IIL and IIH, Added CIN
spec, Changed frequency stability and aging specs, Relaxed duty cycle spec
added for >450 MHz, Removed period jitter spec, and Revised switching
waveform figures
*B 2718898 WWZ 06/15/09 Minor ECN to post data sheet to external web
*C 2768029 KVM 09/18/09 Change V
OD
limits from 250/450 mV to 247/454 mV
Change I
SB
max from 250 A to 200 A
Add clause to I
OZ
Condition column
Add max limit for T
R
, T
F
: 1.0 ns
Change T
OE
max from 100 ns to 120 ns
Change T
LOCK
max from 10 ms to 5 ms
*D 2897691 KVM 03/23/10 Updated data sheet status from Preliminary to Final
Updated Ordering Information
Added Possible Configurations
Updated Package Diagram
*E 2973338 CXQ 07/08/10 Added Standard and Application-Specific Factory Configurations table on page 2.
Added phase jitter specs for pre-defined configurations in AC Electrical
Characteristics (note 7 refers users to the new table on page 2 for typical specs).
Added CY2X013LXI100T, CY2X013LXI122T, CY2X013LXI125T, and
CY2X013LXI156T devices to Ordering Information and added note 8 to reference
the configuration descriptions for each new device.
Changed all references to CyberClocksOnline software to CyClockWizard.
Removed section on phase noise versus jitter SW optimization.
*F 3047226 BASH 10/08/10 Added CY2X013LXI062T to Standard and Application-Specific Factory Configu-
rations table on page 2 and to Ordering Information table.
Added Acronym and Units of Measure table
Updated datasheet as per template
*G 3205939 BASH 03/25/11 Added CY2X013LXI200T to Standard and Application-Specific Factory
Configurations table on page 2 and to Ordering Information table.
*H 3846281 PURU 12/19/2012 Updated Standard and Application-Specific Factory Configurations (Removed
pruned parts and their details).
Updated Ordering Information (Updated part numbers).
Updated Package Diagram:
spec 001-10044 – Changed revision from *A to *B.
