MAX9723
Stereo DirectDrive Headphone Amplifier
with BassMax, Volume Control, and I
2
C
4 _______________________________________________________________________________________
TIMING CHARACTERISTICS
(V
DD
= SHDN = 3V, PGND = SGND = 0V, C1 = C2 = 1µF, BB_ = 0V, gain = 0dB, maximum volume, BassMax disabled. Load connect-
ed between OUT_ and SGND where specified. T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25°C, see
Timing Diagram.) (Notes 1, 3)
SYMBOL
MIN TYP MAX
Serial Clock Frequency f
SCL
0
400
kHz
Bus Free Time Between a STOP
and a START Condition
t
BUF
1.3 µs
START Condition Hold Time
t
HD:STA
0.6 µs
Low Period of the SCL Clock t
LOW
1.3 µs
High Period of the SCL Clock t
HIGH
0.6 µs
Setup Time for a Repeated
START Condition
t
SU:STA
0.6 µs
Data Hold Time
t
HD:DAT
t
SU:DAT
100
ns
Maximum Rise Time of SDA and
SCL Signals
t
r
300
ns
Maximum Fall Time of SDA and
SCL Signals
t
f
300
ns
Setup Time for STOP Condition
t
SU:STO
Pulse Width of Suppressed Spike
100
ns
Maximum Capacitive Load for
Each Bus Line
C
L_BUS
400
Note 1: All specifications are 100% tested at T
A
= +25°C. Temperature limits are guaranteed by design.
Note 2: Inputs AC-coupled to SGND.
Note 3: Guaranteed by design.
Note 4: Headphone mode testing performed with a 32Ω resistive load connected to GND. Mode transitions are controlled by
SHDN. The K
CP
level is calculated as: 20 x log [(level peak voltage during mode transition, no input signal)/(peak voltage
under normal operation at rated power)]. Units are expressed in dB.
Note 5: Output power MIN is specified at T
A
= +25°C.