1
®
FN6582.1
ISL54063, ISL54064
Negative Signal Swing, Sub-ohm, Dual
SPST with Click and Pop Elimination
Single Supply Switch
The Intersil ISL54063 and ISL54064 devices are a low
ON-resistance, low voltage, bi-directional, dual
single-pole/single-throw (SPST) analog switch. It is designed
to operate from a single +1.8V to +6.5V supply and pass
signals that swing down to 6.5V below the positive supply rail.
Targeted applications include battery powered equipment that
benefit from low r
ON
(0.56Ω), low power consumption (20nA)
and fast switching speeds (t
ON
=55ns, t
OFF
= 18ns). The
digital inputs are 1.8V logic-compatible up to a +3V supply.
The ISL54063 and ISL54064 also features integrated circuitry
to eliminate click and pop noise to an audio speaker. The
ISL54063, ISL54064 are offered in a small form factor
package, alleviating board space limitations. It is available in a
tiny 10 Ld 1.8 x 1.4mm µTQFN or 10 Ld 3mmx3mm TDFN
package.
The ISL54063 is a committed dual single-pole/single-throw
(SPST) that consist of two normally open (NO) switches with
independent logic control. The ISL54064 is a committed dual
single-pole/single-throw (SPST) that consist of two normally
closed (NC) switches with independent logic control.
Features
Pb-free (RoHS Compliant)
Negative Signal Swing (Max 6.5V below V+)
Audio Click and Pop Elimination Circuitry
ON-Resistance (r
ON
)
- V+ = +4.5V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.55Ω
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.57Ω
- V+ = +2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.82Ω
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8Ω
•r
ON
Matching Between Channels . . . . . . . . . . . . . . . . .10mΩ
•r
ON
Flatness Across Signal Range . . . . . . . . . . . . . . . .0.35Ω
Low THD+N @ 32Ω Load . . . . . . . . . . . . . . . . . . . . . . 0.02%
Single Supply Operation. . . . . . . . . . . . . . . . . +1.8V to +6.5V
Low Power Consumption @ 3V (P
D
) . . . . . . . . . . . 24nW
Fast Switching Action (V+ = +4.3V)
-t
ON
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43ns
-t
OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23ns
ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >6kV
Guaranteed Break-before-Make
1.8V Logic Compatible (+3V supply)
Low I+ Current when V
INH
is not at the V+ Rail
Available in 10 Ld µTQFN 1.8x1.4mm and 10 Ld 3x3mm
TDFN
Applications
Audio and Video Switching
Battery powered, Handheld, and Portable Equipment
- MP3 and Multimedia Players
- Cellular/mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
Portable Test and Measurement
Medical Equipment
Related Literature
Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
Application Note AN557 “Recommended Test Procedures
for Analog Switches”
TABLE 1. FEATURES AT A GLANCE
ISL54063 ISL54064
Number of Switches 22
SW SPST NO SPST NC
4.3V r
ON
0.65Ω 0.65Ω
4.3V t
ON
/t
OFF
43ns/23ns 43ns/23ns
2.7V r
ON
0.9Ω 0.9Ω
2.7V t
ON
/t
OFF
55ns/18ns 55ns/18ns
1.8V r
ON
1.8Ω 1.8Ω
1.8V t
ON
/t
OFF
145ns/28ns 145ns/28ns
Packages 10 Ld µTQFN, 10 Ld TDFN
r
ON
(Ω)
V
COM
(V)
0
12 3
4
5
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
-1
-2-3
-4
-5
-6
I
COM
= 100mA
V+ = 1.8V
V+ = 2.7V
V+ = 4.5V
ON-RESISTANCE vs SUPPLY VOLTAGE vs
SWITCH VOLTAGE
Data Sheet November 3, 2009
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
2
FN6582.1
November 3, 2009
Pinouts (Note 1)
ISL54063
(10 LD TDFN)
TOP VIEW
ISL54064
(10 LD TDFN)
TOP VIEW
ISL54063
(10 LD µTQFN)
TOP VIEW
ISL54064
(10 LD µTQFN)
TOP VIEW
NOTE:
1. Switches Shown for INx = Logic “0”.
IN1
NO1
COM1
N.C.
GND
IN2
NO2
COM2
N.C.
V+
1
2
3
4
5
10
9
8
7
6
CLICK AND
CIRCUITRY
POP
IN1
N.C.
COM1
NC1
GND
IN2
N.C.
COM2
NC2
V+
1
2
3
4
5
10
9
8
7
6
CLICK AND
CIRCUITRY
POP
GND V+
N.C.
COM2
NO2
N.C.
COM1
NO1
IN1 IN2
1
2
3
4
5
10
9
8
7
6
CLICK AND
CIRCUITRY
POP
GND V+
NC2
COM2
N.C.
NC1
COM1
N.C.
IN1 IN2
1
2
3
4
5
10
9
8
7
6
CLICK AND
CIRCUITRY
POP
Truth Table
INx
ISL54063
NOx to COMx
ISL54064
NCx to COMx
0OFFON
1ONOFF
NOTE: Logic “0” 0.5V. Logic “1” 1.4V with a 3V supply.
Pin Descriptions
PIN FUNCTION
V+ IC Power Supply (+1.8V to +6.5V). Decouple V+ to
ground by placing a 0.1µF capacitor at the V+ and GND
supply lines as near as the IC as possible.
GND Ground Connection
INx Digital Control Input
COM Analog Switch Common Pin
NOx Analog Switch Normally Open Pin
NCx Analog Switch Normally Closed Pin
N.C. No Connect
ISL54063, ISL54064
3
FN6582.1
November 3, 2009
Ordering Information
PART
NUMBER
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL54063IRTZ
(Note 3)
4063 -40 to +85 10 Ld 3x3 TDFN L10.3x3A
ISL54063IRTZ-T
(Notes 2, 3)
4063 -40 to +85 10 Ld 3x3 TDFN (Tape and Reel) L10.3x3A
ISL54063IRUZ-T
(Notes 2, 4)
T6 -40 to +85 10 Ld Thin µTQFN (Tape and Reel) L10.1.8x1.4A
ISL54064IRTZ
(Note 3)
4064 -40 to +85 10 Ld 3x3 TDFN L10.3x3A
ISL54064IRTZ-T
(Notes 2, 3)
4064 -40 to +85 10 Ld 3x3 TDFN (Tape and Reel) L10.3x3A
ISL54064IRUZ-T
(Notes 2, 4)
T7 -40 to +85 10 Ld Thin µTQFN (Tape and Reel) L10.1.8x1.4A
NOTES:
2. Please refer to TB347 for details on reel specifications.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-
020.
4. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu
plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
ISL54063, ISL54064

ISL54063IRTZ-T

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
Analog Switch ICs SUB-OHM SWITCH DL SPDT W/NEG SWING10LD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union