4
www.pericom.com PS9059A 07/28/12
PI3VDP411L SA
Dual Mode DisplayPort™ to DVI/HDMI™ Electrical bridge (Level Shier)
Pin Name I/O Type Descriptions
19 OUT_D2+ O
HDMI 1.3 compliant TMDS output. OUT_D2+ makes a dierential output
signal with OUT_D2-.
20 OUT_D2- O
HDMI 1.3 compliant TMDS output. OUT_D2- makes a dierential output
signal with OUT_D2+
22 OUT_D1+ O
HDMI 1.3 compliant TMDS output. OUT_D1+ makes a dierential output
23 OUT_D1- O
HDMI 1.3 compliant TMDS output. OUT_D1- makes a dierential output
signal with OUT_D1+
25 OE# I
Enable for level shier path.
OE# IN_D Termination OUT_D Outputs
1 > 100KΩ High-Z
28 SCL_SINK I/O
5V DDC Clock I/O. Pulled up by external termination to 5V.
DDC_EN DDCBSEL DDC level shier type
Low X DISABLE DDC level shier
High Low
Passive level shier ENABLE
Connected to SCL_SOURCE through voltage-
limiting integrated NMOS passgate
High High
Active level shier ENABLE
Connected to SCL_SOURCE through bi-
direction buer
29 SDA_SINK I/O
5V DDC Data I/O. Pulled up by external termination to 5V.
DDC_EN DDCBSEL DDC level shier type
High Low
Passive level shier ENABLE
Connected to SDA_SOURCE through voltage-
limiting integrated NMOS passgate
High High
Active level shier ENABLE
Connected to SDA_SOURCE through bi-
direction buer
30 HPD_SINK I
Low Frequency, 0V to 5V (nominal) input signal. is signal comes from the
TMDS connector. Voltage High indicates “plugged” state; voltage low indicated
“unplugged”. HPD_SINK is pulled down by an integrated 100K ohm pull-down
resistor.
32 DDC_EN I
Enables DDC level shier path
DDC_EN Passgate
High (3.3V) Enable