IB IL RS UNI(-2MBD)-PAC
8235_en_01 PHOENIX CONTACT 4
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection IP20
Protection class III, IEC 61140, EN 61140, VDE 0140-1
General data
Connection data
Name Inline connectors
Connection method Spring-cage connection
Conductor cross section solid / stranded 0.08 mm² ... 1.5 mm²
Conductor cross section [AWG] 28 ... 16
Interface Inline local bus
Connection method Inline data jumper
Interface RS-232, RS-485, RS-422
Connection method Spring-cage connection
Transmission physics Copper
Transmission speed Inline local bus
IB IL RS UNI-PAC 500 kBit/s
IB IL RS UNI-2MBD-PAC 2 MBit/s
Power consumption
Main circuit supply U
M
24 V DC
I/O voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption from U
M
Typ. 15 mA
Current consumption from U
M
max. 25 mA
Communications power U
L
7.5 V (via voltage jumper)
Current consumption from U
L
Typ. 78 mA
Current consumption from U
L
max. 90 mA
Power loss max. 1.2 W (Within the permissible operating temperature)
This terminal takes no current from the U
ANA
und U
S
potential jumpers.
Electrical isolation/isolation of the voltage areas
Serial interface/7.5 V supply (bus logic) 500 V AC , 50 Hz , 1 min
Serial interface/24 V supply U
M
500 V AC , 50 Hz , 1 min
Serial interface/functional earth ground 500 V AC , 50 Hz , 1 min
7.5 V supply (bus logics) / functional earth ground 500 V AC , 50 Hz , 1 min
24 V supply (U
M
)/functional earth ground 500 V AC , 50 Hz , 1 min
Electrical isolation of the logic level from the serial interface is ensured by the DC/DC converter.
The serial interface control and data lines galvanically have the same potential. FE is a separate potential area.
Error messages to the higher level control or computer system
None
Approvals
For the latest approvals, please visit www.phoenixcontact.net/catalog.
