1. Overview
page 2
62fo6002,52.luJ15.0.veR
1500-1700B30JER
)T62/C61M,B62/C61M,A62/C61M(puorGA62/C61M
Item Specification
CPU Basic instructions 91 instructions
Minimun instruction
41.7 ns (f(BCLK) = 24MHZ
(4)
, VCC = 4.2 to 5.5 V) (M16C/26B)
execution time
50 ns (f(BCLK) = 20MHZ, VCC = 3.0 to 5.5 V)
(M16C/26A, M16C/26B, M16C/26T(T-ver.))
100 ns (f(BCLK) = 10MHZ, VCC = 2.7 to 5.5 V)
(M16C/26A , M16C/26B)
50 ns (f(BCLK) = 20MHZ, VCC = 4.2 to 5.5 V -40 to 105°C)
(M16C/26T(V-ver.))
62.5 ns (f(BCLK) = 16MHZ, VCC = 4.2 to 5.5 V -40 to 125°C)
(M16C/26T(V-ver.))
Operating mode Single-chip mode
Address space 1 Mbyte
Memory capacity See 1.4 Product Information
Peripheral I/O ports 39 I/O pins
Function Multifunction timers TimerA:16 bits x 5 channels, TimerB:16 bits x 3 channels
Three-phase motor control timer
Serial I/O 2 channels (UART, clock synchronous serial I/O)
1 channel
(UART, clock synchronous, I
2
C bus
(1)
, or IEBus
(2)
)
A/D converter 10 bit A/D Converter : 1 circuit, 12 channels
DMAC 2 channels
CRC calcuration circuit
1 circuit (CRC-CCITT and CRC-16) with MSB/LSB selectable
Watchdog timer 15 bits x 1 channel (with prescaler)
Interrupts 20 internal and 8 external sources, 4 software sources,
Interrupt priority level: 7
Clock generation circuit 4 circuits
Main clock oscillation circuit(*), Sub-clock oscillation circuit(*)
On-chip oscillator, PLL frequency synthesizer
(*)Equipped with a built-in feedback resister.
Oscillation stop detection Main clock oscillation stop, re-oscillation detection function
Voltage detection circuit On-chip (M16C/26A, M16C/26B), not on-chip (M16C/26T)
Electrical Power supply voltage VCC = 4.2 to 5.5 V (f(BCLK) = 24 MHZ)
(4)
(M16C/26B)
Characteristics V
CC = 3.0 to 5.5 V (f(BCLK) = 20 MHZ) (M16C/26A, M16C/26B)
VCC = 2.7 to 5.5 V (f(BCLK) = 10 MHZ)
VCC = 3.0 to 5.5 V (M16C/26T(T-ver.))
VCC = 4.2 to 5.5 V (M16C/26T(V-ver.))
Power consumption 16 mA (Vcc = 5 V, f(BCLK) = 20 MHz)
25 µA (f(XCIN) = 32 KHz on RAM)
3 µA (Vcc = 3 V, f(XCIN) = 32 KHz, in wait mode)
0.7 µA (Vcc = 3 V, in stop mode)
Flash Memory Programming /erasure 2.7 to 5.5 V (M16C/26A, M16C/26B)
Version voltage 3.0 to 5.5 V (M16C/26T(T-ver.)) 4.2 to 5.5 V (M16C/26T(V-ver.))
Programming /erasure
100 times (all area) or 1,000 times (block 0 to 3)
endurance
/ 10,000 times
(block A, block B)
(3)
Operating Ambient Temperature -20 to 85°C / -40 to 85°C
(3)
(M16C/26A , M16C/26B)
-40 to 85°C (M16C/26T(T-ver.))
-40 to 105°C / -40 to 125°C (M16C/26T(V-ver.))
Package 48-pin plastic molded QFP
NOTES:
1. I
2
C bus is a trademark of Koninklijke Philips Electronics N. V.
2. IEBus is a trademark of NEC Electronics Corporation.
3. See Table 1.7 Product Code for the program and erase endurance, and operating ambient temperature.
4. The PLL frequency synthesizer is used to run the M16C/26B at f(BCLK) = 24 MHz.
Table 1.1. M16C/26A Group(M16C/26A, M16C/26B, M16C/26T) Performance (48-Pin Package)
1.2 Performance Outline
Table 1.1 and 1.2 outline performance overview of the M16C/26A Group (M16C/26A, M16C/26B, M16C/
26T).
