HN (AHN)
–3–
ASCTB5E 201408-T
RATING
1. Coil data
1) DC coils
2) AC coils (50/60Hz)
2. Specifications (Plug-in Standard type and TM type)
Notes: *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. For the AC coil types, the operate/release time will differ depending on the phase.
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal coil current
[±20%]
Coil resistance
(at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
5V DC
70%V or less of
nominal voltage
(Initial)
15%V or more of
nominal voltage
(Initial)
106.4mA 47Ω [±10%]
0.53W
170%V of
nominal voltage
6V DC 88.2mA 68Ω [±10%]
12V DC 44.4mA 270Ω [±10%]
24V DC 22.0mA 1,090Ω [±10%]
48V DC 11.0mA 4,350Ω [±10%]
100V DC 5.3mA 18,870Ω [±10%]
110V DC 4.8mA 22,830Ω [±10%]
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal coil current [±20%] Nominal operating power
Max. applied voltage
(at 20°C 68°F)
50Hz 60Hz 50Hz 60Hz
12V AC
80%V or less of
nominal voltage
(Initial)
30%V or more of
nominal voltage
(Initial)
93mA 75mA
Approx.
1.1 to 1.4 V A
Approx.
0.9 to 1.2 V A
140%V of
nominal voltage
24V AC 46.5mA 37.5mA
100/110V AC 11.0/13.0mA 9.0/10.6mA
110/120V AC 10.0/11.8mA 8.2/9.7mA
200/220V AC 5.5/6.5mA 4.5/5.3mA
220/240V AC 5.0/5.9mA 4.1/4.8mA
Characteristics Item Specifications
Contact
Arrangement 1 Form C 2 Form C 1 Form A (TM type)
Contact resistance (Initial)
Max. 100 mΩ
(By voltage drop 6 V DC 1A)
Max. 50 mΩ
(By voltage drop 6 V DC 1A)
Max. 100 mΩ
(By voltage drop 6 V DC 1A)
Contact material AgSnO
2 type AgNi type AgSnO2 type
Rating
Nominal switching capacity (resistive load) 10A 250V AC, 10A 30V DC 5A 250V AC, 5A 30V DC 16A 250V AC, 16A 30V DC
Max. switching power (resistive load) 4,000VA, 300W 1,250VA, 150W 4,000VA, 480W
Max. switching voltage 250V AC, 30V DC
Max. switching current
16A (at AC load),
10A (at DC load)
5A 16A
Nominal operating power 0.53W, 0.9VA
Min. switching capacity (Reference value)*
1
100mA 5V DC 1mA 1V DC 100mA 5V DC
Electrical
characteristics
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA.)
Between contact sets —
3,000 Vrms for 1min.
(Detection current: 10mA.)
—
Between contact and coil 5,000 Vrms for 1min. (Detection current: 10mA.)
Temperature rise (coil) (at 70°C 158°F) Max. 60°C 140°F (By resistive method, nominal coil voltage)
Operate time (at 20°C 68°F)*
2
Max. 15ms (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Release time (at 20°C 68°F)*
2
Max. 5ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without
diode)/Max. 20ms (with diode)
Mechanical
characteristics
Shock resistance
Functional Min. 100 m/s
2
(Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Destructive Min. 1,000 m/s
2
(Half-wave pulse of sine wave: 6 ms.)
Vibration resistance
Functional 10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 1.5 mm
Expected life
Mechanical AC: Min. 10
7
; DC: Min. 2×10
7
(at 300 times/min.)
Electrical (at nominal switching capacity) Min. 10
5
(at 20 times/min.) Min. 10
5
(at 10 times/min.)
Conditions
Conditions for operation, transport and storage*
3
(Not freezing and condensing at low temperature)
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. Operating speed 20 times/min. (at nominal switching capacity)
10 times/min.
(at nominal switching capacity)
Unit weight Approx. 19 g .67 oz Approx. 17 g .60 oz Approx. 19 g .67 oz
