HN (AHN) RELAY ACCESSORIES
–4–
ASCTB257E 201408-T
6. HN2 Screw terminal socket (Finger protect type)
NOTES
(AHNA21P)
External dimensions
3.4±0.3
.134±.012
M3 .118
.244±.012 dia.
6.2±0.3 dia.
4.0
.157
77.0
3.031
15.5
.610
23.3
.917
28.5
1.122
63.2
2.488
*67.2
*2.646
23.5
.925
35.6
1.402
77.0
3.031
58.5
2.303
41.0
1.614
23.5
.925
4.2±0.3
.165±.012
Tolerance: ±0.5 ±.020
* Reference in case of using DIN rail (ATA48011)
Notes: 1. In order to prevent breakage and disfiguring, the screw tightening torque for the terminal socket should be within the range of 0.5 to 0.8 N·m.
2. When attaching the terminal socket directly to a chassis, please use the metric coarse thread screw M3 × 30.
3. Use rod or plate terminals, etc. (You cannot use Y-shape or round terminals.)
Schematic (Top view)
Mounting hole dimensions
7.9
.311
M3
3.2
.118
.126
or
dia. hole
CAD Data
About the relay-securing hook
• Screw terminal socket
1) Installation of the securing hook is
easily performed by pressing upward in
the direction of the arrows.
2) Removal of the securing hook is easily
performed by releasing the hook and
pressing down, as shown in the figure.
• Screw terminal socket
(Finger protect type)
1) Install the securing hook by pressing
the parts with arrows after inserting the
relay.
2) Removal of the relay is easily
performed by pressing the parts with
arrows.
• PC board terminal socket
1) Installation of the securing hook is
easily performed by pressing upward in
the direction of the arrows.
2) Removal of the securing hook is easily
performed by releasing the hook and
pressing down, as shown in the figure.
* To prevent damage and deformity, please use
the relay-securing hook at 10 N or less.
