© Semiconductor Components Industries, LLC, 2017
May, 2018 − Rev. 5
1 Publication Order Number:
NCV7608/D
NCV7608
Octal Configurable
Low/High Side Driver
The NCV7608 integrates 8 output drivers configurable in any
combination of high−side, low−side, or H−Bridge configurations. The
integrated standard Serial Peripheral Interface (SPI) allows digital
control of all output stages and provides diagnostic fault information.
In addition, four channels (#5−8) can be PWM controlled via external
control input pins.
Integrated clamping circuits (both in high and low−side operational
modes), waveshaping, positive and negative transient protection, and
dedicated channel pair overtemperature shutdown circuits provide for
a wide range of automotive and industrial applications.
Features
• Eight Independent Configurable Drivers
• R
DS(on)
= 1.2 W (typ @25°C)
• SPI Interface for Data Communication
♦ 16 Bit Frame Length, Daisy Chain Compatible
♦ 3.3 V/5 V Compatible
♦ Frame Detection
• PWM Inputs for 4 Outputs
• Power Up Without Open Circuit Detection Active (for LED
Applications)
• Ultra−low Standby Current
• Over Current Protection
♦ Characterized to AEC Q10X−12−REV A
• High−Side and Low−Side Flyback Protection
• Fault Reporting
• Undervoltage Lockout (VS and V
CC
)
• Overvoltage Shutdown (VS)
• Supports LED Loads
• Supports Cold Cranking Operation Down to 3 V
• Overtemperature Protection
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Typical Applications
• Automotive
• Industrial
• Relay Drive
• DC Motor Drive
• LED Drive
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G or G = Pb−Free Package
MARKING
DIAGRAMs
SOIC−28
DW SUFFIX
CASE 751F
www.onsemi.com
NCV7608
AWLYYWWG
See detailed ordering and shipping information in the package
dimensions section on page 25 of this data sheet.
ORDERING INFORMATION
SSOP36 EP
DQ SUFFIX
CASE 940AB
NCV7608
AWLYYWWG
G
(Note: Microdot may be in either location)
