OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SML-L13DTAFS

P1-P3P4-P6P7-P9P10-P10
PRODUCTS
Surface Mount
Chip LED
TYPE
SML-L13DTAFS
PAGE
／
< Specifications (Precautions and Prohibitions) >
●
Precaution for circuit design
1) The products are designed and produced for application in ordinary electronic equipment (AV equipment,
OA equipment, telecommunication equipment, home appliances, amusement equipment, etc.).
If the products are to be used in devices requiring extremely high reliability (medical equipment,
transport equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment
including car accessories, safety devices, etc.) and whose malfunction or operational error may endanger
human life and sufficient fail-safe measures, please consult with the ROHM sales staff in advance. If
product malfunctions may result in serious damage, including that to human life, sufficient fail-safe
measures must be taken, including the following:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits in the case of single-circuit failure
2) The products are designed for use in a standard environment and not in any special environments.
Application of the products in a special environment can deteriorate product performance. Accordingly,
verification and confirmation of product performance, prior to use, is recommended if used under the
following conditions:
[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents
[b] Use outdoors where the products are exposed to direct sunlight, or in dusty places
[c] Use in places where the products are exposed to sea winds or corrosive gases, including
Cl
2
, H
2
S, NH
3
, SO
2
, and NO
2
[d] Use in places where the products are exposed to static electricity or electromagnetic waves
[e] Use in proximity to heat-producing components, plastic cords, or other flammable items
[f] Use involving sealing or coating the products with resin or other coating materials
[g] Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after
soldering
[h] Use of the products in places subject to dew condensation
3) The products are not radiation resistant.
4) The Company is not responsible for any problems resulting from use of the products under conditions not
recommended herein.
5) The Company should be notified of any product safety issues. Moreover, product safety issues should
be periodically monitored by the customer.
6) De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta).
When used in sealed area, confirm the actual ambient temperature.
7) Confirm that operation temperature is within the specified range described in product
specification.
8) Failure induced under deviant condition from what defined in the product specification can not be
guaranteed.
9) When product safety related problems arises, please immediately inform to ROHM, and consider
technical counter measure.
DATE:Dec./22/2009
SPECIFICATION No.：
TENTATIVE (20091222)
DESIGN
K.Mineshita
CHECK
M.Kobayakawa
APPROVAL
H.Toda
REV.
－
TSZ22111･04･002
PRODUCTS
Surface Mount
Chip LED
TYPE
SML-L13DTAFS
PAGE
／
< Specifications (Precautions and Prohibitions) >
●
Precaution for Mounting / Circuit board design
When a highly active halogenous (chlorine, bromine, etc.) flux is used, the remainder of flux may
negatively affect product performance and reliability.
● Precautions Regarding Application Examples and External Circuits
1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the
characteristics of the products and external components, including transient characteristics, as well as
static characteristics.
2) The application examples, their constants, and other types of information contained herein are applicable
only when the products are used in accordance with standard methods. Therefore, if mass production is
intended, sufficient consideration to external conditions must be made.
● Precautions for Electrostatic
This product is Electrostatic sensitive product, which may be damaged due to Electrostatic discharge.
Please take proper caution during manufacturing and storing so that voltage exceeding product maximum
rating won’t be applied to products. Please take special care under dry condition
(e.g. Grounding of human body / equipment / solder iron, isolation from charged objects,
setting of Ionizer, friction prevention and temperature / humidity control).
● Precautions for product label
QR code printed on ROHM product label is only for internal use, and please do not use at customer site.
It might contain an internal part number that is inconsistent with a product part number.
● Precautions for disposition
When disposing products please dispose them properly with an industry waste company.
● Precautions for Foreign exchange control regulation
ROHM has not determined whether or not the products are considered “a controlled product or labor” as
specified in the Foreign Exchange and Foreign Trade Control Law.
Accordingly, if exportation of the products, either separately or integrated in another company’s products,
is intended, or giving the products to persons who are not residents is planed, additional steps are
required, based upon the appropriate regulations.
● Prohibitions Regarding Industrial Property
1) These Specifications contain information related to the ROHM industrial property. Any use of them
other than pertaining to the usage of appropriate products is not permitted. Duplication of these
specifications and its disclosure to a third party without the Company’s permission are prohibited.
2) Information and data on products, including application examples, contained in these specifications are
simply for reference; the company does not guarantee any industrial property rights, intellectual property
rights, or any other rights of a third party regarding this information or data. Accordingly, the Company
does not bear any responsibility for:
[a] infringement of the intellectual property rights of a third party
[b] any problems incurred by the use of the products listed herein
3) The Company prohibits the purchaser of its products to exercise or use the intellectual property rights,
industrial property rights, or any other rights that either belong to or are controlled by the Company, other
than the right to use, sell, or dispose of the products.
REV.： －
SPECIFICATION No.：
TENTATIVE (20091222)
TSZ22111･05･002
PRODUCTS
Surface Mount
Chip LED
TYPE
SML-L13DTAFS
PAGE
／
< Specifications (Precautions and Prohibitions) >
● Precautions for Storage / Transportation
1) Product performance and soldered connections may deteriorate if the products are stored in the following
places:
[a] Where the products are exposed to sea winds or corrosive gases, including Cl
2
, H
2
S, NH
3
, SO
2
,
and NO
2
[b] Where the temperature or humidity exceeds those recommended by the Company
[c] Storage in direct sunshine or condensation
[d] Storage in high Electrostatic
2) Storage temperature and humidity
[a] Package : Not to be opened before using
[b] After unpackaging : LEDs to be kept in our moisture proof package with some desiccant
(SILICA GEL) LEDs to be baked in case the SILICAGEL indicator changed its color from
either blue to clear or green to pink.
[c] Early use is recommended after unsealed.
Return the unused items into the moisture proof package and seal tightly.
Pleases refer to the individual specifications for the expiration terms of use.
[d] The baking condition may not be the same for very item.
Please refer the individual specifications for the detail.
3) Even under ROHM recommended storage condition, solderability of products over 1 year old may be
degraded.
4) Store / transport cartons in the correct direction, which is indicated on a carton as a symbol.
Otherwise bent leads may occur due to excessive stress applied when dropping of a carton.
● Other Matters
1) Please sign these Specifications and return one copy to the Company.
If a copy is not returned within three months after the issued date specified on the front page of
these Specifications, the Company will consider the Specifications accepted.
2) If any matter related to these Specifications needs to be clarified, discussions shall be held promptly
between the two parties concerned to determine the issue.
REV.： －
SPECIFICATION No.：
TENTATIVE (20091222)
TSZ22111･05･002
P1-P3P4-P6P7-P9P10-P10

SML-L13DTAFS

Mfr. #:
Buy SML-L13DTAFS
Manufacturer:
ROHM Semiconductor
Description:
Standard LEDs - SMD RECOMMENDED ALT 755-CSL0701DT5
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet