Rev. 1.1 March 2012
Page 1 of 1
www.aosmd.com
AOZ1253
3A EZBuck Synchronous
Buck Regulator
General Description
The AOZ1253 is a high efficiency, low quiescent
current and simple to use 3A synchronous buck
regulator. This device operates from 4.5V to 26V
input voltage range and provides up to 3A of
continuous output current with an adjustable output
voltage down to 0.6V.
The AOZ1253 is offered in the Exposed Pad SO-8
package which is rated over a -40°C to +85°C
ambient temperature range.
Features
4.5V to 26V input voltage operation range
High efficiency PFM mode light load
performance
Synchronous rectification: 115m integrated
high-side switch and 30m internal low-side
switch
Integrated bootstrap diode
External soft start control
Adjustable output voltage down to 0.6V
3A continuous output current
Fixed frequency of PWM 620kHz operation
Tailored for small profile inductor and ceramic
capacitors
Cycle-by-cycle current limit
Short-circuit protection
Thermal shutdown
Standard exposed pad SO-8 package
-40°C to 150°C operating junction temperature
range
Applications
High performance point-of-load DC/DC
converters
Notebook/ultra mobile PCs/servers
PCIe graphics cards/set top boxes
Set top boxes
DVD drives and HDD
LCD-TV/displays
Typical Application
Not Recommended For New Designs
Not Recommended For New Designs
Replacement Part:
AOZ3013PI (same package)
AOZ3103DI (smaller package)
AOZ1253
Page 2 of 2 Rev. 1.1 March 2012
www.aosmd.com
Ordering Information
Part Number Temperature Range Package Environmental
AOZ1253PI
-40°C to +85°C
EPAD SO-8 Green
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
EPAD SO-8
(Top View)
Pin Description
Part Number Pin Name Pin Function
1 PGND Power Ground connection.
2 VIN Input Voltage Supply Pin. When VIN rises above the UVLO threshold the device starts up.
Note: Connect close decoupling capacitor from VIN to PGND to minimize input switching
loop.
3 BST
Bootstrap Connection for High-side NFET Gate Drive Input. Connect 10nF capacitor from
BST to LX.
4 SS Soft Start Input. Connect a capacitor between SS to GND for soft start time control.
5 COMP External Loop Compensation Input.
6 AGND Signal Ground Input.
7 FB
The Feedback Voltage Input. It is used to determine the output voltage via a resistor divider
between the output and AGND.
8 VDD Internal LDO Voltage Output. Connect a 1µF capacitor close to VDD to AGND.
Exposed Pad LX Output Connection to Inductor. Thermal connection for output stage.
VIN
BST
Exposed Pad
LX
2
3
SS
4
PGND
1
FB
AGND
7
6
COMP
5
VDD
8
Not Recommended For New Designs
AOZ1253
Page 3 of 3 Rev. 1.1 March 2012
www.aosmd.com
Functional Block
Not Recommended For New Designs

AOZ1253PI

Mfr. #:
Manufacturer:
Description:
IC REG BUCK ADJUSTABLE 3A 8SO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet