KMA199 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 2 — 7 December 2011 28 of 36
NXP Semiconductors
KMA199
Programmable angle sensor
14.2.2 Bulk-current injection
Tests according to ISO 11452-4, third edition (2005-04), were fulfilled.
Test level: 200 mA with C
L
=1nF.
State: A.
14.2.3 Strip line
Tests according to ISO 11452-5, second edition (2002-04), were fulfilled.
Test level: 200 V/m with C
L
= 1 nF; extended up to 1 GHz.
State: A.
14.2.4 Immunity against mobile phones
Tests according to ISO 11452-2, second edition (2004-11), were fulfilled.
State: A.
Definition of Global System for Mobile Communications (GSM) signal:
• Pulse modulation: per GSM specification (217 Hz; 12.5 % duty cycle)
• Modulation grade: 60 dB
• Sweep: linear 800 MHz to 3 GHz (duration 10 s at 890 MHz, 940 MHz and 1.8 GHz
band)
• Antenna polarization: vertical, horizontal
• Field strength: 200 V/m during on-time [calibration in Continuous Wave (CW)]
In deviation of ISO 11452-2 a GSM signal (definition see above) instead of an AM signal
was used.
14.3 Electrical transient transmission by capacitive coupling [ISO 7637-3,
first edition (1995-07)]
The common understanding of the requested function is that an effect is tolerated as
described in Table 25
during the disturbance.
Tests according to ISO 7637-3 were fulfilled.
Severity level: IV (for pulse 3a and 3b).
Class: B for pulse 3a, B for pulse 3b.
Table 25. Failure condition for electrical transient transmission
Parameter Comment Min Max Unit
Variation of output signal in analog
output mode
value measured relative to the
output at test start
- 0.9 %V
DD