
September 2013 Doc ID 17461 Rev 2 1/26
1
VND830E-E
Double channel high-side driver
Features
■ Output current: 9.5 A
■ CMOS compatible inputs
■ On-state open-load detection
■ Off-state open-load detection
■ Output stuck to V
CC
detection
■ Open drain status outputs
■ Undervoltage shutdown
■ Overvoltage clamp
■ Thermal shutdown
■ Current and power limitation
■ Very low standby current
■ Protection against loss of ground and loss of
V
CC
■
Reverse battery protection
■ Very low electromagnetic susceptibility
■ Optimized electromagnetic emission
Description
The VND830E-E is a monolithic device made by
using STMicroelectronics™ VIPower™ M0-3
technology. It is intended for driving resistive or
inductive loads with one side connected to
ground.
Active V
CC
pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
The device detects open-load condition both in
on-state and off-state. Output shorted to V
CC
is
detected in the off-state.
Output current limitation protects the device in
overload condition. In case of long duration
overload, the device limits the dissipated power to
safe level up to thermal shutdown intervention.
Thermal shutdown with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears.
Type R
DS(on)
I
OUT
V
CC
VND830E-E 65 mΩ
(1)
1. Per each channel.
9.5 A
(1)
36 V
Table 1. Device summary
Package
Order codes
Tube Tape and reel
SO-16L VND830E-E VND830ETR-E
www.st.com