PTFA080551E V1 Datasheet PTFA080551E V1, PTFA080551F V1 | P10-P11

PTFA080551E

PTFA080551F

Data Sheet 10 of 11 Rev. 01, 2006-03-16

Package Outline Specifications (cont.)

Package 31265

Diagram Notes—unless otherwise specified:

1. Lead thickness: 0.10 +0.051/–0.025 [.004 +.002/–.001].

2. All tolerances ± 0.127 [.005] unless specified otherwise.

3. Pins: D = drain, S = source, G = gate.

4. Interpret dimensions and tolerances per ASME Y14.5M-1994.

5. Primary dimensions are mm. Alternate dimensions are inches.

6. Gold plating thickness:

S - flange: 2.54 micron [100 microinch] (min)

D, G - leads: 1.14 micron ± 0.38 micron [45 microinch ± 15 microinch] (min)

Find the latest and most complete information about products and packaging at the Infineon Internet page

http://www.infineon.com/products

265-cases_31265

(45° X 2.03

[.080])

2X 2.59±0.51

[.102±.020]

LID 10.16±0.25

[.400±.010]

FLANGE 10.16

[.400]

2X 7.11

[.280]

10.16±0.25

[.400±.010]

10.16

[.400]

1.02

[.040]

3.56±.38

[.140±.015]

SPH 1.57

[.062]

0.025 [.001] -A-

10.16

[.400]

15.49±.51

[.610±.020]

R1.27

[R.050]

4X R0.63

[R.025] MAX

Data Sheet 11 of 11 Rev. 01, 2006-03-16

PTFA080551E/F

Confidential, Limited Internal Distribution

Revision History: 2006-03-16 Data Sheet

Previous Version: none

Page Subjects (major changes since last revision)

GOLDMOS

is a registered trademark of Infineon Technologies AG.

Edition 2006-03-16

Published by Infineon Technologies AG,

St.-Martin-Strasse 53,

81669 München, Germany

Attention please!

The information herein is given to describe certain components and shall not be considered as a guarantee of

characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,

descriptions and charts stated herein.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon

Technologies Office (www.infineon.com/rfpower).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question

please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of

Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support

device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are

intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it

is reasonable to assume that the health of the user or other persons may be endangered.

We Listen to Your Comments

Any information within this document that you feel is wrong, unclear or missing at all?

Your feedback will help us to continuously improve the quality of this document.

Please send your proposal (including a reference to this document) to:

highpowerRF@infineon.com

To request other information, contact us at:

+1 877 465 3667 (1-877-GOLDMOS) USA

or +1 408 776 0600 International

P1-P3 P4-P6 P7-P9 P10-P11

PTFA080551E V1

Mfr. #:

Buy PTFA080551E V1

Manufacturer:

Infineon Technologies

Description:

RF MOSFET Transistors RFP-LDMOS GOLDMOS 8 50 W

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

PTFA080551E V1

PTFA080551E V1

Products related to this Datasheet