FCCx410QD3Cxx Product Specification – July 2016
Finisar Corporation – 16-Janunary-2016 Rev. A1 Page 3
27 ModPrsL Module Present
28 IntL Interrupt
29 Vcc Tx +3.3 V Power supply transmitter
30 Vcc1 +3.3 V Power Supply
31 LPMode Low Power Mode
32 GND Ground 1
33 Tx3p Transmitter Non-Inverted Data Input
34 Tx3n Transmitter Inverted Data Input
35 GND Ground 1
36 Tx1p Transmitter Non-Inverted Data Input
37 Tx1n Transmitter Inverted Data Input
38 GND Ground 1
Notes
1. Circuit ground is internally isolated from chassis ground.
II. General Product Characteristics
Parameter Value Unit Notes
Module Form Factor QSFP
Number of Lanes 4 Tx and 4 Rx
Maximum Aggregate Data Rate 42.0 Gb/s
Maximum Data Rate per Lane 10.5 Gb/s
Standard Cable Lengths 3, 5, 10, 15, 20, 30, 50, 100 meters Other lengths may be available
upon request (<100)
Protocols Supported Typical applications include
InfiniBand, Fibre Channel,
40G Ethernet, SATA/SAS3
Electrical Interface and Pin-out 38-pin edge connector Pin-out as defined by the
QSFP MSA
Standard Optical Cable Type Multimode fiber cable
assembly
Maximum Power Consumption
per End
1.3 Watts Varies with output voltage swing
and pre-emphasis settings
(see Figure 5)
Management Interface Serial, I2C-based, 400 kHz
maximum frequency
As defined by the QSFP MSA
Data Rate Specifications
Symbol
Min
Typ
Max
Units
Ref.
Bit Rate per Lane BR 1000 10500 Mb/sec 1
Bit Error Ratio BER 10
2
Notes:
1. 1/10 Gigabit Ethernet and 1/2/4/8/10G Fibre Channel compatible.
2. Tested with a PRBS 2
31
-1 test pattern.