OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2878379

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19
1Description
PROFINET bus coupler, 8 inputs, 24 V DC, 4 outputs,
24 V DC, 500 mA, complete with I/O connectors
IL PN BK DI8 DO4 2SCRJ-PAC
© PHOENIX CONTACT
Data sheet
The bus coupler is the link between a PROFINET network
and the Inline installation system. In addition, it is used to ac-
quire and output digital signals.
Up to 61 Inline devices can be connected at any point to an
existing PROFINET network using the bus coupler.
The bus coupler and the Inline devices form one station with
a maximum of 63 local bus devices. Here, the inputs and
outputs of the bus coupler form the first and second local
bus devices.
Features
– 2 x fiber optic connection according to SCRJ standard
for polymer and HCS (PCF) fibers
– Connection to PROFINET network via SCRJ socket
– Transmission speed of 100Mbps
– Range for 100Mbps: 50m with polymer fiber, 100m
with HCS fiber
– IP parameter setting using the PROFINET controller
– Electrical isolation between Ethernet interface and logic
– Ethernet TCP/IP (management via SNMP)
– Connection of up to 61 other Inline devices
– Connection of a maximum of 16 PCP devices
– Supported protocols: SNMPv1, TFTP, PROFINET,
LLDP and MRP (from firmware 3.20)
– 8 digital inputs, 4 digital outputs
– Automatic baud rate detection on the local bus
(500kbps or 2Mbps)
– Diagnostic and status indicators
– From hardware revision 03:
Approved for use in zone 2 potentially explosive areas
WARNING: Explosion hazard when used in potentially explosive areas
When using the terminal in potentially explosive areas, observe the corresponding notes.
This data sheet is only valid in association with the ILSYSINSTUME user manual.
Make sure you always use the latest documentation.
It can be downloaded from the product at phoenixcontact.net/products
.
Here you will also find the current GSDML file.
7649_en_04
2014-02-12
IL PN BK DI8 DO4 2SCRJ-PAC
7649_en_04 PHOENIX CONTACT 2
2Table of contents
1 Description .............................................................................................................................. 1
2 Table of contents ..................................................................................................................... 2
3 Ordering data .......................................................................................................................... 3
4 Technical data ......................................................................................................................... 4
5 Internal circuit diagram ............................................................................................................ 9
6 Local status and diagnostic indicators................................................................................... 10
7 Diagnostic indicators for PROFINET ..................................................................................... 11
8 Connection of PROFINET, power supply, actuators, and sensors......................................... 12
9 Connection example.............................................................................................................. 13
10 Connection note .................................................................................................................... 13
11 Notes on using the terminal block in potentially explosive areas ........................................... 14
12 Mapping inputs and outputs to PROFINET............................................................................ 15
13 Process data.......................................................................................................................... 15
14 Startup................................................................................................................................... 15
15 Parameterization ................................................................................................................... 16
16 Firmware update.................................................................................................................... 17
17 Device replacement............................................................................................................... 17
18 Applicative system redundancy for process data................................................................... 17
19 Failsafe behavior ................................................................................................................... 17
20 Dynamic configuration on the local bus ................................................................................. 17
21 Byte rotation for 16 and 32-channel Inline terminals with a SIMATICR S7 controller............. 18
IL PN BK DI8 DO4 2SCRJ-PAC
7649_en_04 PHOENIX CONTACT 3
Description Type Order No. Pcs. / Pkt.
PROFINET bus coupler, 8 inputs, 24 V DC, 4 outputs, 24 V DC, 500 mA,
complete with I/O connectors
IL PN BK DI8 DO4 2SCRJ-PAC 2878379 1
3Ordering data
Accessories Type Order No. Pcs. / Pkt.
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with
marking option, width: 9.5 mm, color: gray (Assembly)
CLIPFIX 35 3022218 50
Insert strip, Sheet, white, Unlabeled, Can be labeled with: Office printing
systems, Plotter:Laser printer, Mounting type: Insert, Lettering field:
62 x 46 mm (Marking)
ESL 62X46 0809502 5
Labeling field, width: 48.8 mm (Marking) IB IL FIELD 8 2727515 10
Insert strip, Sheet, white, Unlabeled, Can be labeled with: Office printing
systems, Plotter:Laser printer, Mounting type: Insert, Lettering field:
62 x 10 mm (Marking)
ESL 62X10 0809492 1
Labeling field, width: 12.2 mm (Marking) IB IL FIELD 2 2727501 10
End clamp, for assembly on NS 32 or NS 35/7.5 DIN rail (Assembly) E/UK 1201442 50
Connector set, for Inline bus coupler with I/Os mounted in rows (Plug/
Adapter)
IL BKDIO-PLSET 2878599 1
Inline power terminal or boost terminal, complete with accessories (plug
and labeling field), 24 V DC, without fuse
IB IL 24 PWR IN/R-PAC 2861674 1
SCRJ fiber optic connector, IP20, duplex, with fast connection technology,
for polymer fiber 980/1000 µm, for individual wire diameter 2.2 mm
VS-SCRJ-POF-FA-IP20 1654879 1
SCRJ fiber optic connector, IP20, duplex, with fast connection technology,
for HCS fiber 200/230 µm, for individual wire diameter 2.9 mm
VS-SCRJ-HCS-FA-IP20 1654866 1
Fiber optic connector SCRJ, IP20, duplex, with fast connection technology,
for PROFINET, for HCS fiber 200/230 µm, for individual wire diameter
2.2 mm
VS-SCRJ-HCS-FA-IP20-PN 1404087 1
Assembled fiber optic cable, break-out cable, HCS fiber 200/230 µm,
SCRJ/IP20 on SCRJ/IP20, for installation inside control cabinets,
length: 1 m
VS-PC-2XHCS-200-SCRJ/SCRJ-1 1654934 1
Assembled fiber optic cable, break-out cable, HCS fiber 200/230 µm,
SCRJ/IP20 on SCRJ/IP20, for installation inside control cabinets,
length: 2 m
VS-PC-2XHCS-200-SCRJ/SCRJ-2 1654947 1
Assembled fiber optic cable, break-out cable, HCS fiber 200/230 µm,
SCRJ/IP20 on SCRJ/IP20, for installation inside control cabinets,
length: 5 m
VS-PC-2XHCS-200-SCRJ/SCRJ-5 1654950 1
SCRJ cutting tool set, for polymer fiber, for field assembly of SCRJ/IP20
and SCRJ/IP67 Push-Pull connectors with fast connection technology,
consisting of stripping tool, aramid scissors, SCRJ cutting tool, micro-
scope, 2x SCRJ connectors IP20 (Tools)
VS-SCRJ-POF-KONFTOOL-CUT 1657096 1
SCRJ polishing tool set, for polymer fiber, for field assembly of the SCRJ
connector (IP20/IP67) with fast connection technology, with stripping tool,
diagonal cutter, aramid scissors, polishing materials, microscope,
2x SCRJ connector IP20 (Tools)
VS-SCRJ-POF-KONFTOOL-POLISH 1658820 1
Refilling set for VS-SCRJ-POF-KONFTOOL-POLISH, consisting of two
polishing discs and a polisher (Tools)
VS-SCRJ-POF-POLISH 1656673 1
SCRJ connector set for polymer fiber, for self assembly, consisting of 2 du-
plex quick mounting connectors with bending protection (Plug/Adapter)
PSM-SET-SCRJ-DUP/2-POF 2708656 1
HCS assembly kit for SCRJ quick mounting connectors, including stripping
blade, stripping pliers, aramide yarn scissors, fiber stripper, microscope,
fiber cleaving tool for standard HCS and HCS GI fibers, and documentation
(Tools)
PSM-HCS-KONFTOOL/SC-RJ 2708876 1
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19

2878379

Mfr. #:
Buy 2878379
Manufacturer:
Phoenix Contact
Description:
I/O Modules IL PN BK DI8 DO4 2SCRJ-PAC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet