Rev. 1.0 Page 13 of 13 www.sitime.com
© SiTime Corporation 2014. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of a
Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii)
unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper
installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress.
Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by
operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or
usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any SiTime product and any product documentation. Products sold by
SiTime are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved
or at stake. All sales are made conditioned upon compliance with the critical uses policy set forth below.
CRITICAL USE EXCLUSION POLICY
BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES
OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.
SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products
does not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the
sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be strictly
prohibited.
The Smart Timing Choice
The Smart Timing Choice
Standard Frequency, High Temperature Oscillator
SiT1618
Table 15. Additional Information
Document Description Download Link
Time Machine II
MEMS oscillator programmer http://www.sitime.com/support/time-machine-oscillator-programmer
Field
Programmable
Oscillators
Devices that can be
programmable in the field
by Time Machine II
http://www.sitime.com/products/field-programmable-oscillators
Manufacturing
Notes
Tape & Reel dimension,
reflow profile and other
manufacturing related info
http://www.sitime.com/component/docman/doc_download/85-manufacturing-notes-for-sitime-oscillators
Qualification
Reports
RoHS report, reliability
reports, composition reports
http://www.sitime.com/support/quality-and-reliability
Performance
Reports
Additional performance data
such as phase noise, current
consumption and jitter for
selected frequencies
http://www.sitime.com/support/performance-measurement-report
Termination
Techniques
Termination design
recommendations
http://www.sitime.com/support/application-notes
Layout Techniques Layout recommendations http://www.sitime.com/support/application-notes
Revision History
Table 16. Datasheet Version and Change Log
Version Release Date Change Summary
0.92 1/16/2013 Preliminary
1.0 1/4/14 • added new frequencies
• added ±20 PPM option
• added No Connect (NC) option for Pin
• updated electrical spec to final values
• updated thermal consideration table
• added Maximum Operating Junction Temperature table
• added timing diagrams, test circuits and waveform diagrams
• added performance plots
• added programmable drive strength options
• added pin 1 option section (OE vs ST vs. NC)
• added Time Machine and Field Programmable Device section
• updated ordering info section
• added revision history
• added LifeTime Warranty icon in the feature section
