5100 Series SATA NAND Flash SSD
MTFDDAK240T, MTFDDAK480T, MTFDDAK960T,
MTFDDAK1T9T, MTFDDAK3T8T, MTFDDAK7T6T
MTFDDAV240T, MTFDDAV480T, MTFDDAV960T,
MTFDDAV1T9T
Features
Micron
®
3D TLC NAND Flash
Three performance/endurance levels
ECO
PRO
MAX
TCG Enterprise compliant self-encrypting drive
(SED)
SATA 6 Gb/s interface
ATA modes supported
PIO mode 3, 4
Multiword DMA mode 0, 1, 2
Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
512-byte sector size support
Hot-plug capable (2.5-inch only)
Native command queuing support with 32-com-
mand slot support
ATA-8 ACS-3 revision 5 command set compliant
ATA security feature command set and password
login support
Security erase command set: fast and secure erase
Performance (steady state)
1
Sequential 128KB read: Up to 540 MB/s
Sequential 128KB write: Up to 520 MB/s
Random 4KB read: Up to 93,000 IOPS
Random 4KB write: Up to 74,000 IOPS
Quality of Service
2
Read/Write (99.9%): 500µs/500µs
Read/Write (99.999%): 9ms/5ms
Endurance
4
: Total bytes written (TBW)
ECO: Up to 8,400TB
PRO: Up to 17,600TB
MAX: Up to 17,600TB
Reliability
MTTF: 3.0 million device hours
3
Static and dynamic wear leveling
Uncorrectable bit error rate (UBER): <1 sector
per 10
17
bits read
End-to-end data protection
Enhanced power-loss data protection with data
protection capacitor monitoring
Self-monitoring, analysis, and reporting technology
(SMART) command set
Capacity
4
(unformatted): 240GB, 480GB, 960GB,
1920GB, 3840GB, 7680GB
Mechanical:
2.5-inch x 7.0mm form factor
M.2 Type 2280 form factor
RoHS-compliant package
Secure field-upgradeable firmware with digitally
signed firmware image
Power consumption: 240GB/480GB: <4.5W(TYP);
960GB: <5.0W(TYP); 1920GB: <5.5W(TYP); 3840GB/
7680GB: <6.0W(TYP)
Operating temperature
Commercial (0°C to 70°C)
5
Notes:
1. Performance varies by capacity and endur-
ance.
2. 4KB transfers QD = 1 used for READ/WRITE
latency values.
3. The product achieves a MTTF based on pop-
ulation statistics not relevant to individual
units.
4. 1GB = 1 billion bytes; formatted capacity is
less.
5. As reported by SMART.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
5100 Series NAND Flash SSD
Features
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
Part Numbering Information
Micron’s 5100 SSD is available in different configurations and densities. The chart below is a comprehensive list of
options for the 5100 series devices; not all options listed can be combined to define an offered product. Visit mi-
cron.com for a list of valid part numbers.
Figure 1: Part Number Chart
MT FD D AK 480 T BY - 1 AR 1 ES
Micron Technology
Product Family
FD = Flash drive
Drive Interface
D = SATA 6.0 Gb/s
Drive Form Factor
AK = 2.5-inch (7mm)
AV = M.2 (80mm x 22mm)
Drive Capacity
240 = 240GB
480 = 480GB
960 = 960GB
NAND Flash Type
T = TLC
Product Family
BY = 5100 ECO
CB = 5100 PRO
CC = 5100 MAX
Production Status
Blank = Production
ES = Engineering sample
Customer Designator
YY = Standard
Hardware Features
AB = Standard
TA = TAA Compliant
Extended Firmware Features
Z = None
6 = SED TCG eSSC
Sector Size
1 = 512 byte
NAND Flash Component
AR = 384Gb, TLC, x16, 1.8V (3D)
BOM Revision
For example:
1 = 1st generation
2 = 2nd generation
AB6 YY
7T6 = 7680GB
3T8 = 3840GB
1T9 = 1920GB
5100 Series NAND Flash SSD
Features
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
2
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
General Description
Micron’s 5100 solid state drive (SSD) uses a single-chip controller with a SATA interface
on the system side and four channels of Micron NAND Flash internally. Available in
both M.2 and 2.5-inch form factors, the SSD integrates easily in existing storage infra-
structures.
The SSD is designed to use the SATA interface efficiently during both READs and
WRITEs while delivering bandwidth-focused performance. SSD technology enables en-
hanced boot times, faster application load times, reduced power consumption and ex-
tended reliability.
The self-encrypting drive (SED) features a AES-256 encryption engine, providing hard-
ware-based, secure data encryption, with no loss of SSD performance. This SED follows
the TCG Enterprise specification for trusted peripherals. When TCG Enterprise features
are not enabled, the device can perform alternate data encryption by invoking the ATA
security command set encryption features, to provide full disk encryption (FDE) man-
aged in the host system BIOS. TCG Enterprise and ATA security feature sets cannot be
enabled simultaneously.
The data encryption is always running; however, encryption keys are not managed and
the data is not secure until either TCG Enterprise or ATA security feature sets are ena-
bled.
Figure 2: Functional Block Diagram
NAND
SATA
NAND
NAND
NAND
SSD
controller
DRAM
buffer
NAND
5100 Series NAND Flash SSD
General Description
CCMTD-1725822587-10309
5100_series_SSD_disti.pdf - Rev. C 08/17 EN
3
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.

MTFDDAV480TBY-1AR16ABYY

Mfr. #:
Manufacturer:
Micron
Description:
Solid State Drives - SSD 5100 480GB M.2 SSD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union