240Pin DDR3L 1600 UDIMM
2GB Based on 256Mx8
AQD-D3L2GN16-SQ
in specifications at any time without prior notice.
Operating Temperature Condition
1. Operating Temperature is the case surface temperature on the center/top side of the DRAM. For the
measurement conditions, please refer to JESD51-2 standard.
2. At 0 - 85C, operation temperature range are the temperature which all DRAM specification will be
supported.
Absolute Maximum DC Ratings
Voltage on VDD relative to Vss
Voltage on VDDQ pin relative to Vss
Voltage on any pin relative to Vss
1. Stress greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
2. Storage Temperature is the case surface temperature on the center/top side of the DRAM. For the
measurement conditions, please refer to JESD51-2 standard.
AC & DC Operating Conditions
Recommended DC operating conditions
Supply voltage for Output
I/O Reference Voltage (DQ)
I/O Reference Voltage (CMD/ADD)
1. Under all conditions VDDQ must be less than or equal to VDD.
2. VDDQ tracks with VDD, AC parameters are measured with VDD and VDDQ tied together.
3. Peak to peak AC noise on VREF may not allow deviate from VREF(DC) by more than +/-1% VDD.