32-Channel, 14-Bit DAC with Full-Scale Output
Voltage Programmable from 50 V to 200 V
AD5535
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved.
FEATURES GENERAL DESCRIPTION
High integration
32-channel, 14-bit DAC with integrated high voltage
output amplifier
The AD5535 is a 32-channel, 14-bit DAC with an on-chip high
voltage output amplifier. This device is targeted for optical
micro-electromechanical systems. The output voltage range is
programmable via the REF_IN pin. The output range is 0 V to
50 V when REF_IN = 1 V, and 0 V to 200 V when REF_IN = 4 V.
Each amplifier can source 700 μA, which is ideal for the
deflection and control of optical MEMS mirrors.
Guaranteed monotonic
Housed in 15 mm × 15 mm CSP_BGA package
Full-scale output voltage
Programmable from 50 V to 200 V via reference input
700 μA drive capability
Integrated silicon diode for temperature monitoring
The selected DAC register is written to via the 3-wire interface.
The serial interface operates at clock rates of up to 30 MHz and
is compatible with DSP and microcontroller interface standards.
DSP-/microcontroller-compatible serial interface
1.2 MHz channel update rate
Asynchronous
RESET
facility
–10°C to +85°C temperature range
APPLICATIONS
Optical micro-electromechanical systems (MEMS)
Optical crosspoint switches
Micropositioning applications using piezoelectric actuators
Level setting in automotive test and measurement
The device is operated with AV
CC
= 4.75 V to 5.25 V, DV
CC
=
2.7 V to 5.25 V, V
−
= −4.75 V to −5.25 V, V
+
= 4.75 V to 5.25 V,
and V
PP
= 210 V. REF_IN is buffered internally on the AD5535
and should be driven from a stable reference source.
FUNCTIONAL BLOCK DIAGRAM
RF
R1
RF
R1
RF
R1
RF
R1
INTERFACE
CONTROL
LOGIC
DAC
DAC
DAC
DAC
DV
CC
AV
CC
SYNC
D
IN
SCLK
DGND
AGND
DAC_GND
RESET
REF_IN
V
PP
PGND
V
–
V
+
14-BIT BUS
ANODE
CATHODE
V
OUT
0
V
OUT
1
V
OUT
30
V
OUT
31
AD5535
05068-001
Figure 1.