9100 U.2 and HHHL NVMe PCIe SSDs
MTFDHAL800MCE, MTFDHAL1T6MCE, MTFDHAL3T2MCE,
MTFDHAL1T2MCF, MTFDHAL2T4MCF, MTFDHAX800MCE,
MTFDHAX1T6MCE, MTFDHAX3T2MCE, MTFDHAX1T2MCF,
MTFDHAX2T4MCF
Features
• Micron
®
16nm MLC NAND Flash
• PCIe
®
Gen3: HHHL x4; U.2 x4
• NVMe™ 1.1b, plus Command Effects Log
• Capacity
1
– 9100 PRO: 800GB, 1.6TB, 3.2TB
– 9100 MAX: 1.2TB, 2.4TB
• Endurance (total bytes written)
– 800GB: Up to 2.4PB
– 1.2TB: Up to 4.8PB
– 1.6TB: Up to 4.8PB
– 2.4TB: Up to 9.6PB
– 3.2TB: Up to 9.6PB
• Industry-standard 512- and 4096-byte sector sizes
• Power: ~7W idle, selectable 20W, 25W or
unlimited (30W MAX)
• Surprise insertion/surprise removal (SISR) and
hot-plug capable (U.2 form factor only)
• Power-backed cache
• Steady state performance
2
(varies by capacity and
form factor)
– Sequential 128KB read: 3.0 GB/s
– Sequential 128KB write: 2.0 GB/s
– Random 4KB read: 750,000 IOPS
– Random 4KB write: 300,000 IOPS
• Latency to media performance, typical (QD = 1)
– READ: 120µs, WRITE: 30µs
• Reliability
– MTBF: 2 million hours
3
– Field-upgradable firmware
– UBER: <1 sector per 10
17
bits read
• NVMe-MI 1.0 over SMBus for drive management
• SMART command set support
• Temperature
4
– 0°C to 85°C SMART temperature
– 0°C to 55°C ambient
– Temperature protection
• Mechanical/electrical
– U.2: 69.85 x 15.00 x 100.5mm, 12V (-6%/+8%)
– HHHL: 68.9 x 18.71 x 167.65mm, 12V (-6%/+8%)
• Shock
– U.2: 1000G/1ms
– HHHL: 500G /1ms
• Vibration: 3.1 G
RMS
5–800Hz @ 30 min/axis
Controller Features
• NVMe controller
– Number of queues: 128 SQ/CQ pairs
– Round robin arbitration
• Interrupt support coalescing
• NVMe command set attributes
– Completion queue entry size: 16 bytes
– Submission queue entry size: 64 bytes
Notes:
1. User capacity: 1GB = 1 billion bytes;
1TB = 1 trillion bytes.
2. Steady state as defined by SNIA Solid State
Storage Performance Test Specification En-
terprise v1.1.
3. Based on population statistics that are not
relevant to individual units and a T
CASE
of
60° C.
4. Operating temperature is the drive case
temperature as measured by the SMART
temperature. See air flow recommenda-
tions.
9100 U.2 and HHHL NVMe PCIe SSDs
Features
CCMTD-731836775-1
9100_hhhl_u2_nvme_pcie_ssd.pdf - Rev. I 03/17 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
