MTFDHAL800MCE-1AN1ZABYY Datasheet MTFDHAL1T2MCF-1AN1ZABYY, MTFDHAL1T6MCE-1AN1ZABYY, MTFDHAL2T4MCF-1AN1ZABYY | P4-P6

General Description

Micron's 9100 is a family of high-performance NVMe SSDs. The 9100 utilizes a PCIe

Gen3 interface, the innovative Non-Volatile Memory Express protocol and Micron's

own high-speed NAND to provide high throughput and IOPS, very low latency, and con-

sistent quality of service. Reliability assurance measures include cyclic redundancy

checks (CRC), redundant array of independent NAND (RAIN), capacitor-backed power

loss protection and Micron's extensive validation, quality and reliability testing. It fea-

tures thermal monitoring and protection, SMART attributes for status polling and

NVMe-MI 1.0 for out-of-band management.

The device comes in two form factors: half-height/half-length (HHHL) add-in card

(AIC) and 2.5-inch U.2 (small form factor 8639), both of which utilize a PCIe x4 Gen3

host interface. All capacities are available in both form factors.

The 9100 has two endurance classes: the 9100 PRO for read-centric use at roughly 1

drive writes per day (DWPD); and the 9100 MAX for mixed-use workloads at about 3

DWPD. The PRO version comes in 800GB, 1.6TB and 3.2TB capacities, while the MAX is

sized at either 1.2TB or 2.4TB.

9100 U.2 and HHHL NVMe PCIe SSDs

General Description

CCMTD-731836775-1

9100_hhhl_u2_nvme_pcie_ssd.pdf - Rev. I 03/17 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

Logical Block Address Configuration

The number of logical block addresses (LBAs) reported by the device ensures sufficient

storage space for the specified capacity.

Table 1: LBA Count in Accordance with IDEMA LBA1-03

Capacity 512-Byte Sector LBA Count 4KB Sector LBA Count

800GB 1,562,824,368 195,353,046

1.2TB 2,344,225,968 293,028,246

1.6TB 3,125,627,568 390,703,446

2.4TB 4,688,430,768 586,053,846

3.2TB 6,251,233,968 781,404,246

9100 U.2 and HHHL NVMe PCIe SSDs

Logical Block Address Configuration

CCMTD-731836775-1

9100_hhhl_u2_nvme_pcie_ssd.pdf - Rev. I 03/17 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

Performance

Table 2: Drive Performance

Specification

9100 PRO 9100 MAX

U.2 and HHHL U.2 and HHHL

Unit800GB 1.6TB 3.2TB 1.2TB 2.4TB

Sequential read (128KB I/O size) 2.05 2.8 3.2 2.9 3.2

GB/s

Sequential write (128KB I/O size) 0.69 1.3 2.2 1.3 2.2

Random read (4KB I/O size) 525,000 700,000 750,000 700,000 750,000

IOPS

Random write (4KB I/O size) 50,000 120,000 160,000 210,000 300,000

Random READ latency, QD = 1 (TYP) 120

µs

Random WRITE latency, QD = 1 (TYP) 30

Notes:

1. Performance specifications shown are with power limiting off. See Electrical Characteris-

tics section for more details.

2. Performance is steady state as defined by SNIA Solid State Storage Performance Test

Specification Enterprise v1.1.

3. Performance may vary up to 10% over life of drive.

Table 3: Quality of Service

Specification

Quality of Service (99.9%) Queue Depth = 1 Unit

READ latency 230 µs

WRITE latency 70 µs

Note:

1. Quality of service is measured using random 4KB workloads at steady state.

9100 U.2 and HHHL NVMe PCIe SSDs

Performance

CCMTD-731836775-1

9100_hhhl_u2_nvme_pcie_ssd.pdf - Rev. I 03/17 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21 P22-P24

MTFDHAL800MCE-1AN1ZABYY

Mfr. #:

Buy MTFDHAL800MCE-1AN1ZABYY

Manufacturer:

Micron

Description:

SSD 800GB U.2 MLC NVME 12V

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

MTFDHAL800MCE-1AN1ZABYY

MTFDHAL800MCE-1AN1ZABYY

Products related to this Datasheet