1416716 Datasheet 1416716 | P1-P3

103995_en_02

FOC-M12-MNNA-TC...

Data sheet

1 Description

The FO transceiver is available in two versions.

– FOC-M12-MNNA-TC-1300 for applications with

50/125 m, 62.5/125 m or 200/230 m fibers

– FOC-M12-MNNA-TC-650 for applications with

980/1000 m fibers

The FO transceiver features a high-speed transmitter and

receiver circuit with a 1310 nm or 650 nm optical wave-

length at high optical power. This makes the M12 trans-

ceiver an ideal alternative in data transmission systems with

fiber optics.

An I

C interface ensures that the transceiver is efficiently

monitored and managed.

Due to the high data transmission rate of 125 Mbps, the op-

tical characteristics, and connection technology for the fiber

optics, the M12 transceiver offers a wealth of application op-

tions:

– Optical networks

– Fast Ethernet

– Industrial electronics

– Power electronics

1.1 Properties

– 125 Mbps

– +3.3 V power supply

– PECL inputs/outputs

– Signal Detect (SD) output

–I

C management interface

– Metal housing

– Pin connector pattern in accordance with 61754-27

– Ambient temperature: -40°C... +85 °C

– RoHS-compliant

FOC-M12-MNNA-TC-1300

– 1310 nm wavelength

– -19°dBm output power (50/125 m)

– -30 dBm receiver sensitivity

– Suitable for 50/125 m, 62.5/125 m and 200/230 m

FOC-M12-MNNA-TC-650

– 650 nm wavelength

– -4 dBm output power (980/1000 m)

– -20 dBm receiver sensitivity

– Suitable for 980/1000 m

To optimize transmission performance and to achieve the maximum transmission path, correctly pre-assembled

fiber optic connectors are required.

Loads that exceed the specified limit values can cause permanent damage to the component. The limit values rep-

resent the load limits of the component.

Make sure you always use the latest documentation.

It can be downloaded at

phoenixcontact.net/products.

This data sheet is valid for all products listed on the following page:

M12 FO transceivers

FOC-M12-MNNA-TC...

2 / 8 PHOENIX CONTACT 103995_en_02

2 Ordering data

3 Limit values

Loads that exceed the limit values can cause permanent

damage to the component. The limit values represent the

load limits of the component.

Continuous operation with these values is not recom-

mended, as this may jeopardize the reliability of the compo-

nent.

The FO transceiver, connectors, and couplings should only

be mounted finger tight.

Fiber optic transceiver

Description Type Order No. Pcs. / Pkt.

M12 FO transceiver, duplex, wavelength: 650 nm for 125 Mbps, for POF and

PCF fibers, for PCB mounting, M16 fastening thread, with sealing cap, includ-

ing I²C interface for transceiver monitoring and management

FOC-M12-MNNA-TC-650 1416716 1

M12 FO transceiver, duplex, wavelength: 1300 nm for 125 Mbps, for GOF fi-

bers, for PCB mounting, M16 fastening thread, with sealing cap, including I²C

interface for transceiver monitoring and management

FOC-M12-MNNA-TC-1300 1416729 1

Accessories

Description Type Order No. Pcs. / Pkt.

M12 fiber optic coupler, duplex, suitable for all fibers, with wall bracket, IP65

degree of protection

FOC-M12-BU/BU 1416677 1

Assembled FO cable, round cable, 980/1000 μm POF fibers, for in-

stallation inside buildings

M12 FO to M12 FO

1 m FOC-PN-B-1000/M12-C/SCRJ/1

FOC-PN-B-1000/M12-C/SCRJ/2

FOC-PN-B-1000/M12-C/SCRJ/5

1408865

1408864

1416648

2 m 1

5 m 1

Assembled FO cable, round cable, 980/1000 μm POF fibers, for in-

stallation inside buildings

M12 FO to SCRJ/IP20

1 m FOC-PN-B-1000/M12-C/M12-C/1

FOC-PN-B-1000/M12-C/M12-C/2

FOC-PN-B-1000/M12-C/M12-C/5

1408871

1408870

1416680

2 m 1

5 m 1

Assembled FO cable, round cable, 200/230 μm PCF-GI fibers, for

installation inside buildings

M12 FO to M12 FO

1 m FOC-HCS-GI-1005/M12-C/M12-C/1

FOC-HCS-GI-1005/M12-C/M12-C/2

FOC-HCS-GI-1005/M12-C/M12-C/5

1408873

1408872

1416693

2 m 1

5 m 1

Assembled FO cable, round cable, 200/230 μm PCF-GI fibers, for

installation inside buildings

M12 FO to SCRJ/IP20

1 m FOC-HCS-GI-1005/M12-C/SCRJ/1

FOC-HCS-GI-1005/M12-C/SCRJ/2

FOC-HCS-GI-1005/M12-C/SCRJ/5

1408867

1408866

1416651

2 m 1

5 m 1

Assembled FO cable, round cable, 50/125 μm GOF-MM fibers, for

installation inside buildings

M12 FO to M12 FO

1 m FOC-M12-M12-GB02/2

FOC-M12-M12-GB02/1

FOC-M12-M12-GB02/5

1408874

1408875

1416703

2 m 1

5 m 1

Assembled FO cable, round cable, 50/125 μm GOF-MM fibers, for

installation inside buildings

M12 FO to LC duplex

1 m FOC-M12-LC:A-GB02/1

FOC-M12-LC:A-GB02/2

FOC-M12-LC:A-GB02/5

1408869

1408868

1416664

2 m 1

5 m 1

Limit values

Operating temperature -40 °C ... +85°C

Storage temperature -40 °C ... +100°C

Soldering temperature 2 mm from housing, t  5 s 260°C

Supply voltage 4 V

Data input voltage -0.5 V ... 4 V

Differential input voltage 2 V (peak-to-peak with FOC-M12-MNNA-TC-1300)

PECL output current -50 mA ... +50 mA

Electrostatic air discharge in acc. with EN 61000-6-2 8 kV

Electrostatic contact discharge in acc. with EN 61000-6-2 4 kV

Immunity of electrical field in accordance with EN 61000-6-2 10 V/m

FOC-M12-MNNA-TC...

103995_en_02 PHOENIX CONTACT 3 / 8

4 Technical data

General data

Storage temperature -40 °C ... 100 °C

Ambient temperature -40 °C ... 85 °C

Supply voltage 3 V ... 3.6 V, typical 3.3 V

Differential input voltage 1 V ... 1.8 V, typical 1.4 V

Current carrying capacity 50 

Data rate 125 Mbps

Humidity 5 % ... 95 %

Transmitter FOC-M12-MNNA-TC-650 FOC-M12-MNNA-TC-1300

Maximum wavelength 

max

625 nm ... 675 nm, typical 650 nm 1280 nm ... 1340 nm, typical 1310 nm

Average optical output voltage -8 dBm ... -5 dBm

980/1000 m, 50 % DC, NA 0.5

-21 dBm ... -18 dBm

50/125 m, 50 % DC, NA 0.2

Current consumption 70 mA ... 80 mA 90 mA ... 120 mA

Rise time 2.5 ns 1.8 ns

Fall time 2.5 ns 1.8 ns

Data input current for logical “0” at least -50 A at least -50 A

Data input current for logical “1” maximum +50 A maximum +50 A

Data input voltage for logical “0” -1.81 V ... -1.475 V -1.81 V ... -1.475 V

Data input voltage for logical “1” -1.165 V ... -0.88 V -1.165 V ... -0.88 V

Receiver FOC-M12-MNNA-TC-650 FOC-M12-MNNA-TC-1300

Maximum receiver sensitivity -25 dBm -31 dBm

Maximum input power At least 2 dBm at least -3 dBm

Current consumption 70 mA ... 80 mA 70 mA ... 80 mA (no load)

Threshold value for signal detection -20 dBm -29.2 dBm

Signal detection hysteresis 1.5 dB ... 6 dB, typical 3 dB 1.5 dB ... 5 dB, typical 2.5 dB

Maximum response time, signal detection 10 s 10 s

Maximum fall time, signal detection 10 s 10 s

Signal detection output voltage log. 0 -1.83 V ... -1.55 V -1.83 V ... -1.55 V

Signal detection output voltage log. 1 -1.08 V ... -0.88 V -1.08 V ... -0.88 V

Data output voltage log. 0 -1.83 V ... -1.55 V -1.83 V ... -1.55 V

Data output voltage log. 1 -1.08 V ... -0.88 V -1.08 V ... -0.88 V

Data output rise time 20 % ... 80 % 2.2 ns 2.2 ns

Data output fall time 80 % ... 20 % 2.2 ns 2.2 ns

Bit error rate <1E-10

 = 650 nm, at 125 Mbps,

Pin = -10 dBm, PRBS23

<1E-10

 = 1300 nm, at 125 Mbps,

Pin = -10 dBm, PRBS23

P1-P3 P4-P6 P7-P8

1416716

Mfr. #:

Buy 1416716

Manufacturer:

Phoenix Contact

Description:

Fiber Optic Connectors M12 duplex 650nm for POF and PCF-MM

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

1416716