FOC-M12-MNNA-TC...
103995_en_02 PHOENIX CONTACT 7 / 8
76-77 2 Reserved Reserved – do not write; reads undefined
78-7B 4 OEMPW OEM password entry field
7C-7F 4 Reserved Reserved – do not write; reads undefined
80-F7 120 User Scratchpad User writeable EEPROM
F8-F9 2 Reserved Reserved – do not write; reads undefined
FA 1 USRPWSET User password setting; read/write using any password;
returns zero otherwise
FB 1 USRPW Entry field for user password
FC-FD 2 POH Power ON hour meter result; read only;
FE 1 Data Ready Flags Data ready bits for each measured parameter; read only
FF 1 User Control End-user control and status bits
Serial address = A4 (hex)
Address (hex) Field size (byte) Name Description
00-3F 64 APCLUTn APC look-up table
40-7F 64 MODLUTn VMOD look-up table
80-BF 64 IFLTUT Bias current fault threshold look-up table
C0-FF 64 EOLLUTn Bias current high alarm look-up table
Serial address = A6 (hex)
Address (hex) Field size (byte) Name Description
00 1 OEMCFG0 Control and status bits
01 1 OEMCFG1 Control and status bits
02 1 OEMCFG2 Control and status bits
03 1 APCSET0 APC setpoint 0
04 1 APCSET1 APC setpoint 1
05 1 APCSET2 APC setpoint 2
06 1 MODSET DAC setpoint
07 1 IBFLT Bias current fault comparator threshold
08 1 TXPFLT TX power fault threshold
09 1 LOSFLT RX loss fault comparator threshold
0A 1 FLTTMR Fault comparator masking interval timer setting
0B 1 FLTMSK Fault source mask bits
0C-0F 2 OEMPWSET OEM area access password
10 1 OEMCAL0 OEM calibration register 0
11 1 OEMCAL1 OEM calibration register 1
12 1 LUTINDX Look-up table index read-back
13 1 Reserved Reserved for future use
14 1 APCDAC Reads back current APC DAC setting
15 1 MODDAC Reads back current MOD setting
16 1 OEMREAD Reads back OEM calibration data
17 1 LOSFLTn LOS deassert threshold
18 1 RXPOT RX-pot tab selection
19 1 OEMCFG4 Starts selection bits
Serial address = A2 (hex) [...]
Address (hex) Field size (byte) Name Description
