©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks
of their respective owners.
If this document is printed it becomes uncontrolled.
Document Number: 108-121024
High Temperature Cable Marker
HTCM-SCE-TP
SCOPE
This Quality Assurance Specification establishes the quality standard for HTCM-SCE-
TP cable markers. Designed to identify cables, wire bundles, pipes and conduits, in
applications of up to 200°C. This system is an automatic method of identifying wire and
cable by printing a mark on the cable marker.
The operating temperature for this product is -55°C to +200°C (-67°F to +392°F).
This system is designed to be applied once cabling has been installed. Each Cable Marker is
bound to the assembly by two Cable ties. Cable Markers are made from radiation-cross linked
modified polyvinylidene fluoride, offering enhanced temperature and chemical resistance.
These Cable Markers are suitable for space applications where low out gassing is critical.
The marker system comprises specific printers and ribbons (refer to Identification Printer
Product Ribbon Matrix Document 411-121005). Compliance to this specification can only be
guaranteed if TE Connectivity approved printers and ribbons are used.
This specification covers the Cable Marker only. For maximum thermal performance, suitable Cable ties must be
used.
This document is electronically reviewed and approved by TE Connectivity.
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is
error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity
reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in
this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for
the latest dimensions and design specifications.
