September 2013 Doc ID 16903 Rev 2 1/30
1
TDA7567PD
4 x 50 W differential quad power amplifier
with built-in diagnostics features
Features
■ Multipower BCD technology
■ MOSFET output power stage
■ DMOS power output
■ Differential Input
■ New high efficiency (class SB)
■ High output power capability 4x28 W/4 @
14.4 V, 1 kHz, 10% THD, 4x50 W MAX power
■ Max. output power 4x72 W/2
■ Full I
2
C bus driving:
– Standby
– Independent front/rear soft play/mute
– Selectable gain 26 dB /16 dB (for low noise
line output function)
– High efficiency enable/disable
–I
2
C bus digital diagnostics (including DC
and AC load detection)
■ Operates both in I
2
C and non-I
2
C bus mode
■ Two selectable I
2
C bus addresses
■ Full fault protection
■ DC offset detection
■ Four independent short circuit protection
■ Clipping detector pin with selectable threshold
(2 %/10 %)
■ Standby/mute pin
■ Linear thermal shutdown with multiple thermal
warning
■ ESD protection
Description
The TDA7567PD is a new BCD technology quad
bridge power amplifier in PowerSO36 package
specially intended for automotive applications.
Thanks to the DMOS output stage the
TDA7567PD has a very low distortion allowing a
clear powerful sound. Among the features, its
superior efficiency performance coming from the
internal exclusive structure, makes it the most
suitable device to simplify the thermal
management in high power sets.
The dissipated output power under average
listening condition is in fact reduced up to 50 %
when compared to the level provided by
conventional class AB solutions.
This device is equipped with a full diagnostics
array that communicates the status of each
speaker through the I
2
C bus.
The I
2
C bus can be disabled and the device can
be controlled by standby/mute pin.
Table 1. Device summary
Order code Package Packing
TDA7567PD PowerSO36 Tube
TDA7567PDTR PowerSO36 Tape and reel
www.st.com