Logical Block Address Configuration
The drive is set to report the number of logical block addresses (LBA) that will ensure
sufficient storage space for the specified density. Standard LBA settings, based on the
IDEMA standard (LBA1-02), are shown below.
Table 1: Standard LBA Settings
Drive Size
Total LBA Max LBA
User Available
Bytes
Decimal Hexadecimal Decimal Hexadecimal (Unformatted)
64GB 125,045,424 7740AB0 125,045,423 7740AAF 64,023,257,088
Physical Configuration
Table 2: 1.8-Inch Dimensions and Weight
Value Unit
Height 5 mm (NOM)
Width 54 mm (NOM)
Length 78.5 mm (NOM)
Unit weight 45 g (MAX)
C400v 1.8-Inch NAND Flash SSD
Logical Block Address Configuration
PDF: 09005aef84559b26
realssd_c400v_1_8.pdf - Rev. D 09/11 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
