OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HCPL-4506-300E

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21
Features
• Performance specied for bommon IPM applications
over industrial temperature range: -40°C to 100°C
• Fast maximum propagation delays
t
PHL
= 480 ns
t
PLH
= 550 ns
• Minimized Pulse Width Distortion
PWD = 450 ns
• 15 kV/µs minimum common mode transient immu-
nity
at V
CM
= 1500 V
• CTR > 44% at I
F
= 10 mA
• Safety approval:
UL Recognized
-3750 V rms / 1 min. for HCPL-4506/0466/J456
-5000 V rms / 1 min. for HCPL-4506 Option 020
and HCNW4506
CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
-V
IORM
= 560 Vpeak for HCPL-0466 Option 060
-V
IORM
= 630 Vpeak for HCPL-4506 Option 060
-V
IORM
= 891 Vpeak for HCPL-J456
-V
IORM
= 1414 Vpeak for HCNW4506
Applications
• IPM isolation
• Isolated IGBT/MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
HCPL-4506 Functional Diagram
8
7
6
1
3
SHIELD
5
2
4
20 kΩ
NC
ANODE
CATHODE
NC
V
CC
V
L
V
O
GND
HCPL-4506/J456/0466, HCNW4506
Intelligent Power Module and Gate Drive Interface Optocouplers
Data Sheet
Description
The HCPL-4506 and HCPL-0466 contain a GaAsP LED while
the HCPL-J456 and the HCNW4506 contain an AlGaAs LED.
The LED is optically coupled to an integrated high gain
photo detector. Minimized propagation delay dierence
between devices makes these optocouplers excellent so-
lutions for improving inverter eciency through reduced
switching dead time.
An on chip 20 kΩ output pull-up resistor can be enabled by
shorting output pins 6 and 7, thus eliminating the need for
an external pull-up resistor in common IPM applications.
Specications and performance plots are given for typical
IPM applications.
Functional Diagram
The connection of a 0.1 µF bypass capacitor
between pins 5 and 8 is recommended.
Truth Table
LED V
O
ON L
OFF H
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
2
Selection Guide
Standard White Mold
Package 8-Pin DIP 8-Pin DIP Small Outline Widebody
Type (300 Mil) (300 Mil) SO8 (400 Mil) Hermetic*
Part HCPL-4506 HCPL-J456 HCPL-0466 HCNW4506 HCPL-5300
Number HCPL-5301
IEC/EN/DIN V
IORM
= 630 Vpeak V
IORM
= 891 Vpeak V
IORM
= 560 Vpeak V
IORM
= 1414 Vpeak —
EN 60747- (Option 060) (Option 060)
5-2
Approval
*Technical data for these products are on separate Avago publications.
3
Ordering Information
HCPL-0466, HCPL-4506 and HCPL-J456 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNW4506 is UL Recognized with 5000 Vrms for 1 minute per UL1577. HCPL-0466, HCPL-4506, HCPL-J456 and
HCNW4506 are approved under CSA Component Acceptance Notice #5, File CA 88324.
Option
Part RoHS non RoHS Surface Gull Tape UL 5000 Vrms/ IEC/EN/DIN
Number Compliant Compliant Package Mount Wing & Reel 1 Minute rating EN 60747-5-2 Quantity
-000E no option 300 mil DIP-8 50 per tube
-300E #300 X X 50 per tube
-500E #500 X X X 1000 per reel
-020E #020 X 50 per tube
HCPL-4506
-320E #320 X X X 50 per tube
-520E #520 X X X X 1000 per reel
-060E #060 X 50 per tube
-360E #360 X X X 50 per tube
-560E #560 X X X X 1000 per reel
-000E no option 300 mil DIP-8 X 50 per tube
HCPL-J456
-300E #300 X X X 50 per tube
-500E #500 X X X X 1000 per reel
-000E no option SO-8 X 100 per tube
HCPL-0466
-500E #500 X X 1500 per reel
-060E #060 X X 100 per tube
-560E #560 X X X 1500 per reel
-000E no option 400 mil X X 42 per tube
HCNW4506
-300E #300 Widebody X X X X 42 per tube
-500E #500 DIP-8 X X X X X 750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-4506-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-4506 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21

HCPL-4506-300E

Mfr. #:
Buy HCPL-4506-300E
Manufacturer:
Broadcom / Avago
Description:
Logic Output Optocouplers 1MBd 1Ch 10mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet