MXL1543
+5V Multiprotocol, 3Tx/3Rx, Software-
Selectable Clock/Data Transceivers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
CC
= +5.0V, C1 = C2 = C4 = 1µF, C3 = C5 = 4.7µF, (Figure 10), T
A
= T
MIN
to T
MAX
. Typical values are at T
A
= +25°C, unless oth-
erwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
All Voltages Referenced to GND Unless Otherwise Noted.
Supply Voltages
V
CC
.......................................................................-0.3V to +6V
V
DD
....................................................................-0.3V to +7.3V
V
EE
.....................................................................+0.3V to -6.5V
V
DD
to V
EE
(Note 1)................................................................13V
Logic Input Voltages
M0, M1, M2, DCE/DTE, T_IN ................................-0.3V to +6V
Logic Output Voltages
R_OUT....................................................-0.3V to (V
CC
+ 0.3V)
Transmitter Outputs
T_OUT_, T3OUT_/R1IN_.....................................-15V to +15V
Short-Circuit Duration............................................Continuous
Receiver Input
R_IN_T3OUT_/R1IN_ ..........................................-15V to +15V
Continuous Power Dissipation (T
A
= +70°C)
28-Pin SSOP (derate 11.1mW/°C above +70°C) .........889mW
Operating Temperature Range
MXL1543CAI .......................................................0°C to 70°C
Junction Temperature .......................................................150°C
Storage Temperature Range ...........................-65°C to +150°C
Lead Temperature (soldering, 10s) ...............................+300°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC CHARACTERISTICS
V
CC
Operating Range V
CC
4.75 5.25 V
RS-530, RS-530A, X.21, no load 13
RS-530, RS-530A, X.21, full load 100 130
V.35 mode, no load 20
V.35 mode, full load 126 170
V.28 mode, no load 20
V.28 mode, full load 40 75
mA
Supply Current
(DCE Mode)
(Digital Inputs = GND or
V
CC
)
(Transmitter Outputs Static)
I
CC
No-cable mode 0.5 10 µA
RS-530, RS-530A, X.21, full load 230
V.35 mode, full load 600
Internal Power Dissipation
(DCE Mode)
P
D
V.28 mode, full load 140
mW
Any mode (except no-cable mode), no load 6.4 6.8
V.28 mode, with load 6.4 6.8
Positive Charge-Pump
Output Voltage
V
DD
V.28, V.35 modes, with load, I
DD
= 10mA 6.4 6.8
V
V.28, V.35, no load -5.6
V.28 mode, full load -5.6 -5.4
V.35 mode, full load -5.6 -5.4
Negative Charge-Pump
Output Voltage
V
EE
RS-530, RS-530A, X.21, full load -5.6 -5.4
V
Supply Rise Time t
r
No-cable mode or power-up to turn on 500 µs
LOGIC INPUTS (M0, M1, M2, DCE/DTE, T1IN, T2IN, T3IN)
Input High Voltage V
IH
2.0
Input Low Voltage V
IL
0.8
V
T1IN, T2IN, T3IN ±10
M0, M1, M2, DCE/DTE = GND -100 -50 -30
Logic Input Current I
IN
M0, M1, M2, DCE/DTE = V
CC
±10
µA
Note 1: V
DD
and V
EE
absolute difference cannot exceed 13V.