HMC219B Data Sheet
Rev. 0 | Page 24 of 27
SPURIOUS AND HARMONICS PERFORMANCE
Mixer spurious products are measured in dBc from the IF output
power level, unless otherwise noted. Spur values are (M × RF) −
(N × LO).
M × N Spurious Outputs, IF = 100 MHz
RF = +2.5 GHz, LO = +2.6 GHz, RF power = −10 dBm, and
LO power = +13 dBm.
N × LO
0 1 2 3 4 5
M × RF
0
27.6 27 55.2 39.4 6.7
1 N/A
1
19.5 35.3 43.8 62.1 78.6
2 62.4 72.6 85.8 81.7 76.6 80.5
3
72.2 67.3 67 73.3 81.3 82.7
4 82.2 85.1 84.6 89.9 85.4 82.8
5 82 80.7 84.4 86.8 90 0.6
1
N/A means not applicable.
RF = +4.5 GHz, LO = +4.6 GHz, RF power = −10 dBm, and
LO power = +13 dBm.
N × LO
0 1 2 3 4 5
M × RF
0
39.2 30.8 35.2 32.9 15
1 N/A
1
34.4 45.6 70.8 56.8 85.3
2 54.7 57.4 57.1 83.3 76.2 80.1
3 83 74 71.4 88 86.1 80.1
4 80.8 84.1 87.3 87.5 88.6 79.9
5 79.2 79.5 83.6 86.1 89.4 2.7
1
N/A means not applicable.
RF = +6 GHz, LO = +6.1 GHz, RF power = −10 dBm, and
LO power = +13 dBm.
N × LO
1
0 1 2 3 4 5
M × RF
0 38.6 27.5 28.7 N/A 16.5
1 N/A 37.6 51.4 44.7 42.3 79.1
2 72.4 62.3 84.8 82.5 78.7 81.3
3 83.5 82 78 86.6 82.4 75.7
4
78.9 83.1 86.9 88.6 85.2 N/A
5 76.3 79.2 84.3 85.9 88.6 6.8
1
N/A means not applicable.
M × N Spurious Outputs, IF = 1000 MHz
RF = +2.5 GHz, LO = +3.5 GHz, RF power = −10 dBm, and
LO power = +13 dBm.
N × LO
0 1 2 3 4 5
M × RF
0 +27.6 2.2 +21.8 +16.5 +50.7
1
+36.1 +6.7 N/A
1
+29.4 +37.5 +56
2 +61 +75.3 +54.8 +62.3 +75.5 +80
3 +75.1 +76.8 +61.4 +68.8 +59.5 +81.5
4
+81 +82.2 +82.8 +59.5 +68.5 +61.8
5 +78.1 +79.6 +82.5 +73.8 +62.7 +54.7
1
N/A means not applicable.
RF = +4.5 GHz, LO = +5.5 GHz, RF power = −10 dBm, and
LO power = +13 dBm.
N × LO
1
0 1 2 3 4 5
M × RF
0 39.2 5.8 43.9 27.3 28.9
1 N/A 13.2 N/A 36.4 50.5 45.1
2 44.5 85.2 56.8 63.8 73.6 81.6
3 78.6 80.5 82.5 75.7 70.6 83.7
4 81.7 80.5 83 83.7 88.7 86.3
5 83.7 76.8 79.4 84.8 87.1 90.1
1
N/A means not applicable.
RF = +6 GHz, LO = +7 GHz, RF power = −10 dBm, and
LO power = +13 dBm.
N × LO
1
0 1 2 3 4 5
M × RF
0 38.6 6.3 36.1 21.9 N/A
1 N/A 15.5 N/A 36.7 60.3 28.7
2
N/A 79.9 67.5 58.9 70.2 78.4
3 64.4 78.8 82.3 73.1 66 82.3
4 77.8 70.2 79 82.7 65.4 72.8
5
80.3 N/A 66.5 78.6 70 59
1
N/A means not applicable.
Data Sheet HMC219B
Rev. 0 | Page 25 of 27
THEORY OF OPERATION
The HMC219B is a general-purpose, double balanced mixer in
an 8-lead, MINI_SO_EP, RoHS-compliant package that can be
used as an upconverter or a downconverter from 2.5 GHz to
7.0 GHz.
When used a downconverter, the HMC219B downconverts RF
between 2.5 GHz and 7.0 GHz to IF between dc and 3 GHz.
When used as an upconverter, the mixer upconverts IF between
dc and 3 GHz to RF between 2.5 GHz and 7.0 GHz.
The mixer provides excellent LO to RF and LO to IF isolation
due to optimized balun structures. The HMC219B requires no
external components or matching circuitry. The RoHS compliant
HMC219B eliminates the need for wire bonding and is compatible
with high volume, surface-mount manufacturing techniques.
HMC219B Data Sheet
Rev. 0 | Page 26 of 27
APPLICATIONS INFORMATION
TYPICAL APPLICATION CIRCUIT
Figure 83 shows the typical application circuit for the HMC219B.
The HMC219B is a passive device and does not require any
external components. The LO and RF pins are internally
dc-coupled. When IF operation is not required until dc, use an
ac-coupled capacitor at the IF port. When IF operation to dc is
required, do not exceed the IF source and sink the current rating
specified in the Absolute Maximum Ratings section.
Figure 83. Typical Application Circuit
EVALUATION PCB INFORMATION
RF circuit design techniques must be implemented for the
evaluation board PCB shown in Figure 84. Signal lines must
have 50 Ω impedance, and the package ground leads and
exposed pad must connect directly to the ground plane, similar to
what is shown in Figure 84. Use a sufficient number of via holes
to connect the top and bottom ground planes. The evaluation
circuit board shown in Figure 84 is available from Analog
Devices, Inc., upon request. Reference EV1HMC219BMS8G
when ordering the evaluation PCB assembly. The bill of
materials for the evaluation PCB is shown in Table 5.
Table 5. Bill of Materials for Evaluation PCB
EV1HM219BMS8G
Reference
Designator
Description
J1 to J3 SMA RF connectors
U1 HMC219B
PCB
1
101650 evaluation PCB, Rogers 4350
1
101650 is the bare EV1HMC219BMS8G PCB.
Figure 84. HMC219B Evaluation PCB
1
2
3
4
8
7
6
5
LO
GND
RF
IF
GND
HMC219B
15452-083
15452-084

HMC219BMS8GE

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
RF Mixer Mixer
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet