LC87FBH08A
www.onsemi.com
17
Continued from preceding page.
Parameter Symbol Pin/Remarks Conditions
Specification
V
DD
[V] min typ max unit
Oscillation
frequency
range
(Note 2-3)
FmCF(1) CF1, CF2 12MHz ceramic oscillation.
See Fig. 1.
2.7 to 5.5 12
MHz
FmCF(2) CF1, CF2 10MHz ceramic oscillation.
See Fig. 1.
2.2 to 5.5 10
FmCF(3) CF1, CF2 4MHz ceramic oscillation.
CF oscillation normal amplifier size selected.
(CFLAMP=0) See Fig. 1.
1.8 to 5.5 4
4MHz ceramic oscillation.
CF oscillation low amplifier size
selected. (CFLAMP=1)
See Fig. 1.
2.2 to 5.5 4
FmMRC(1)
Frequency variable RC oscillation.
(Note 2-4)
1.8 to 5.5 7.84 8.0 8.16
FmMRC(2)
Frequency variable RC oscillation.
Ta=-10 to +85C
(Note 2-4)
1.8 to 5.5 7.88 8.0 8.12
FmRC Internal medium-speed RC oscillation
1.8 to 5.5 0.5 1.0 2.0
FmSRC Internal low-speed RC oscillation
1.8 to 5.5 50 100 200
kHz
FsX’tal XT1, XT2 32.768kHz crystal oscillation
See Fig. 1.
1.8 to 5.5
32.768
Oscillation
stabilization
time
tmsMRC When Frequency variable RC
oscillation state is switched from
stopped to enabled.
See Fig. 3.
1.8 to 5.5 100 s
Note 2-3: See Tables 1 and 2 for the oscillation constants.
Note 2-4: When switching the system clock, allow an oscillation stabilization time of 100s or longer after the
frequency variable RC oscillator circuit transmits from the "oscillation stopped" to "oscillation enabled" state.
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended
Operating Ranges limits may affect device reliability.