NX3V1G66 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 7 — 4 November 2011 3 of 18
NXP Semiconductors
NX3V1G66
Low-ohmic single-pole single-throw analog switch
7.2 Pin description
8. Functional description
[1] H = HIGH voltage level; L = LOW voltage level.
9. Limiting values
[1] The minimum input voltage rating may be exceeded if the input current rating is observed.
[2] The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed but may not
exceed 4.6 V.
[3] For TSSOP5 package: above 87.5 C the value of P
tot
derates linearly with 4.0 mW/K.
For XSON6 package: above 118 C the value of P
tot
derates linearly with 7.8 mW/K.
Table 3. Pin description
Symbol Pin Description
SOT353-1 SOT886
Y 1 1 independent input or output
Z 2 2 independent output or input
GND 3 3 ground (0 V)
E 4 4 enable input (active HIGH)
n.c. - 5 not connected
V
CC
5 6 supply voltage
Table 4. Function table
[1]
Input E Switch
LOFF-state
H ON-state
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.5 +4.6 V
V
I
input voltage enable input E
[1]
0.5 +4.6 V
V
SW
switch voltage
[2]
0.5 V
CC
+ 0.5 V
I
IK
input clamping current V
I
< 0.5 V 50 - mA
I
SK
switch clamping current V
I
< 0.5 V or V
I
>V
CC
+ 0.5 V - 50 mA
I
SW
switch current V
SW
> 0.5 V or V
SW
< V
CC
+ 0.5 V;
source or sink current
- 500 mA
V
SW
> 0.5 V or V
SW
< V
CC
+ 0.5 V;
pulsed at 1 ms duration, < 10 % duty cycle;
peak current
- 750 mA
T
stg
storage temperature 65 +150 C
P
tot
total power dissipation T
amb
= 40 Cto+125C
[3]
- 250 mW