LC75836W
www.onsemi.com
16
Sample Application Circuit 1
1/4 Duty, 1/3 Bias (for use with normal panels)
*2: The pins to be connected to the controller (CE, CL, DI, INH
) can handle 3 V.
*3: In RC oscillator operating mode, an external resistor, Rosc, and an external capacitor, Cosc, must be connected
between the OSC pin and ground. If external clock operating mode is selected, a current protection resistor, Rg (4.7
to 47 k), must be inserted between the external clock output pin (on the external oscillator) and the OSC pin.
(See the “OSC Pin Peripheral Circuit” section.)
*4: When a capacitor except the recommended external capacitance (Cosc = 1000 pF) is connected to the OSC pin, it
should be in the range 220 to 2200 pF.
Sample Application Circuit 2
1/4 Duty, 1/3 Bias (for use with large panels)
*2: The pins to be connected to the controller (CE, CL, DI, INH
) can handle 3 V.
*3: In RC oscillator operating mode, an external resistor, Rosc, and an external capacitor, Cosc, must be connected
between the OSC pin and ground. If external clock operating mode is selected, a current protection resistor, Rg (4.7
to 47 k), must be inserted between the external clock output pin (on the external oscillator) and the OSC pin.
(See the “OSC Pin Peripheral Circuit” section.)
*4: When a capacitor except the recommended external capacitance (Cosc = 1000 pF) is connected to the OSC pin, it
should be in the range 220 to 2200 pF.
General-purpose
Output ports
(P4)
(P2)
(P1)
DI
CL
CE
INH
V
DD
1
S35
COM4
S34
S5
P4/S4
P2/S2
P1/S1
COM3
COM2
COM1
*2
V
DD
V
DD
2
V
SS
C
From the controller
+5V
C
(P3)
P3/S3
*4
OSC
*3
Used for functions
such as backlight
control
LCD panel (up to 140 segments)
C0.047F
C
+5V
R
R
R C
General-purpose
Out
p
ut
p
orts
(P4)
(P2)
(P1)
DI
CL
CE
INH
V
DD
1
S35
COM4
S34
S5
P4/S4
P2/S2
P1/S1
COM3
COM2
COM1
*2
V
DD
V
DD
2
V
SS
From the controller
(P3)
P3/S3
*4
OSC
*3
Used for functions
such as backlight
control
10kR1k
C0.047F
LCD panel (up to 140 segments)
LC75836W
www.onsemi.com
17
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries
in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other
intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON
Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is
responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or
standards, regardless of any support or applications information provided by ON Semiconductor. “Typical parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters,
including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its
patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support
systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall
indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an
Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ORDERING INFORMATION
Device Package Shipping (Qty / Packing)
LC75836W-E
SQFP48 7x7 / SQFP48
(Pb-Free)
1250 / Tray JEDEC
LC75836W-TBM-E
SQFP48 7x7 / SQFP48
(Pb-Free)
1000 / Tape & Reel
LC75836WH-E
SQFP48 7x7 / SQFP48
(Pb-Free)
1250 / Tray JEDEC
LC75836WS-E
SQFP48 7x7 / SQFP48
(Pb-Free)
1250 / Tray JEDEC
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel
Packaging Specifications Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF

LC75836WH-E

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
LCD Drivers LCD DISPLAY DVR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet