OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ADV7604BBCZ-5P

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21
ADV7604 Data Sheet
Rev. D | Page 12 of 20
Pin No. Mnemonic Type
Description
D11 CVDD Power Comparator Supply Voltage (1.8 V).
D12 DDCB_SDA HDMI input HDCP Slave Serial Data Port B. DDCB_SDA is a 3.3 V input that is 5 V tolerant.
D13 DDCB_SCL HDMI input HDCP Slave Serial Clock Port B. DDCB_SCL is a 3.3 V input that is 5 V tolerant.
D14 DDCA_SCL HDMI input HDCP Slave Serial Clock Port A. DDCA_SCL is a 3.3 V input that is 5 V tolerant.
D15 DDCA_SDA HDMI input HDCP Slave Serial Data Port A. DDCA_SDA is a 3.3 V input that is 5 V tolerant.
D16 TVDD Power Terminator Supply Voltage (3.3 V).
D17 RXA_0+ HDMI input Digital Input Channel 0 Complement of Port A in the HDMI Interface.
D18 RXA_0− HDMI input Digital Input Channel 0 Complement of Port A in the HDMI Interface.
E1 DE Digital video output Data Enable. DE is a signal that indicates active pixel data.
E2 CEC Digital I/O Consumer Electronic Control Channel.
E3 NC No connect Do Not Connect.
E4 NC No connect Do Not Connect.
E15 DGND Ground Ground.
E16 DGND Ground Ground.
E17 RXA_C+ HDMI input Digital Input Clock Complement of Port A in the HDMI Interface.
E18 RXA_C− HDMI input Digital Input Clock Complement of Port A in the HDMI Interface.
F1 HS Digital video output Horizontal Synchronization Output Signal in the CP and HDMI Processor.
F2 VS_FIELD Digital video output
Vertical Synchronization Output Signal in the CP and HDMI Processor. FIELD is a
field synchronization output signal in all interlaced video modes. VS or FIELD
can be configured for this pin.
F3 EP_MISO Digital input SPI Master In/Slave Out for External EDID Interface.
F4 EP_MOSI Digital output SPI Master Out/Slave In for External EDID Interface.
F15 DGND Ground Ground.
F16 CVDD Power Comparator Supply Voltage (1.8 V).
F17 TVDD Power Terminator Supply Voltage (3.3 V).
F18 DGND Ground Ground.
G1 P1 Digital video output Video Pixel Output Port.
G2 P0 Digital video output Video Pixel Output Port.
G3 EP_CS Digital output SPI Chip Select for External EDID Interface.
G4 EP_SCK Digital output SPI Clock for External EDID Interface.
G7 DGND Ground Ground.
G8 DGND Ground Ground.
G9 DGND Ground Ground.
G10 DGND Ground Ground.
G11 PVDD Power PLL Supply Voltage (1.8 V ).
G12 PVDD Power PLL Supply Voltage (1.8 V).
G15 NC No connect Do Not Connect.
G16 NC No connect Do Not Connect.
G17 TEST1 Test Do Not Connect.
G18 TEST2 Test Do Not Connect.
H1 P3 Digital video output Video Pixel Output Port.
H2 P2 Digital video output Video Pixel Output Port.
H3 RAW_VSYNC Analog output This pin outputs the raw-sliced, embedded CSYNC or raw digital HS/CS.
H4 RAW_SYNC Analog output This pin outputs the raw-sliced, embedded CSYNC or raw digital HS/CS.
H7 DGND Ground Ground.
H8 DGND Ground Ground.
H9 DGND Ground Ground.
H10 DGND Ground Ground.
H11 AGND Ground Ground.
H12 AGND Ground Ground.
Data Sheet ADV7604
Rev. D | Page 13 of 20
Pin No. Mnemonic Type
Description
H15 XTALP
Miscellaneous
analog
Input pin for the 28.63636 MHz crystal or can be overdriven by an external 1.8 V
28.63636 MHz clock oscillator source to clock the ADV7604. The following
crystal frequencies are also supported: 24.576 MHz and 27.00 MHz.
H16 AVDD Power Analog Supply Voltage (1.8 V).
H17 REFN Misc analog Internal Voltage Reference Output.
H18 REFP Misc analog Internal Voltage Reference Output.
J1 DGND Ground Ground.
J2 DGND Ground Ground.
J3 MCLKOUT Digital output Audio Master Clock Output.
J4 SPDIF/DSD0A/DST Digital output
Multipurpose Pin. S/PDIF Digital Audio Output.
First DSD Data Channel.
DST Stream.
J7 DVDD Power Digital Supply Voltage (1.8 V).
J8 DGND Ground Ground.
J9 DGND Ground Ground.
J10 DGND Ground Ground.
J11 AGND Ground Ground.
J12 AGND Ground Ground.
J15 XTALN
Miscellaneous
analog
This pin should be connected to the 28.63636 MHz crystal or left as a no
connect if an external 1.8 V 28.63636 MHz clock oscillator source is used to clock
the
ADV7604. In crystal mode, the crystal must be a fundamental crystal. The
following crystal frequencies are also supported: 24.576 MHz and 27.00 MHz.
J16 AVDD Power Analog Supply Voltage (1.8 V).
J17 AGND Ground Ground.
J18 AGND Ground Ground.
K1 P4 Digital video output Video Pixel Output Port.
K2 P5 Digital video output Video Pixel Output Port.
K3 LRCLK/DSD2B/DST_FF Digital output
Dual Purpose Pin. Data Output Clock. Left and right audio channels.
Sixth DSD Data Channel.
DST Frame.
K4 SCLK/DST_CLK Digital output
Dual Purpose Pin. Audio Serial Clock Output.
DST Clock.
K7 DVDD Power Digital Supply Voltage (1.8 V).
K8 DVDD Power Digital Supply Voltage (1.8 V).
K9 DGND Ground Ground.
K10 DGND Ground Ground.
K11 AGND Ground Ground.
K12 AVDD Power Analog Supply Voltage (1.8 V).
K15 AVDD Power Analog Supply Voltage (1.8 V).
K16 AVDD Power Analog Supply Voltage (1.8 V).
K17 AIN11 Analog video input Analog Video Input Channel.
K18 AIN12 Analog video input Analog Video Input Channel.
L1 P6 Digital video output Video Pixel Output Port.
L2 P7 Digital video output Video Pixel Output Port.
L3 I2S3/DSD2A/HBR3 Digital output
Multipurpose Pin. I
2
S Audio (Channel 7 and Channel 8).
Fifth DSD Data Channel.
Fourth Block of HBR Stream.
L4 I2S2/DSD1B/HBR2 Digital output
Multipurpose Pin. I
2
S Audio (Channel 5 and Channel 6).
Fourth DSD Data Channel.
Third Block of HBR Stream.
L7 DVDD Power Digital Supply Voltage (1.8 V).
L8 DVDD Power Digital Supply Voltage (1.8 V).
L9 DGND Ground Ground.
L10 DGND Ground Ground.
ADV7604 Data Sheet
Rev. D | Page 14 of 20
Pin No. Mnemonic Type
Description
L11 AGND Ground Ground.
L12 AVDD Power Analog Supply Voltage (1.8 V).
L15 TRI8/VS_IN2 Analog input
Dual Purpose Pin. Trilevel/bilevel input on the SCART or D-terminal connector.
Results are available via I
2
C. This signal can be buffered and output to the
FB_OUT pin.
VS on Graphics Port 2. The VS input signal is used in CP mode for 5-wire timing
mode. VS_IN2 is a 3.3 V input that is 5 V tolerant.
L16 TRI7/HS_IN2 Analog input
Dual Purpose Pin. Trilevel/bilevel input on the SCART or D-terminal connector.
Results are available via I
2
C. This signal can be buffered and output to the
FB_OUT pin.
HS on Graphics Port 2. The HS input signal is used in CP mode for 5-wire timing
mode. HS_IN2 is a 3.3 V input that is 5 V tolerant.
L17 SYNC4 Analog input
Synchronization on green or luma input (SOG/SOY). Used in embedded
synchronization mode. User configurable.
L18 AIN10 Analog video input Analog Video Input Channel.
M1 P8 Digital video output Video Pixel Output Port.
M2 DGND Ground Ground.
M3 DGND Ground Ground.
M4 DGND Ground Ground.
M7 DVDD Power Digital Supply Voltage (1.8 V).
M8 DVDD Power Digital Supply Voltage (1.8 V).
M9 DGND Ground Ground.
M10 DGND Ground Ground.
M11 AGND Ground Ground.
M12 AVDD Power Analog Supply Voltage (1.8 V).
M15 TRI5 Analog input
Trilevel/bilevel input on the SCART or D-terminal connector. Results are
available via I
2
C. This signal can be buffered and output to the FB_OUT pin.
M16 TRI6 Analog input
Trilevel/bilevel input on the SCART or D-terminal connector. Results are
available via I
2
C. This signal can be buffered and output to the FB_OUT pin.
M17 AGND Ground Ground.
M18 AGND Ground Ground.
N1 P9 Digital video output Video Pixel Output Port.
N2 DVDDIO Power Digital I/O Supply Voltage (3.3 V).
N3 DVDDIO Power Digital I/O Supply Voltage (3.3 V).
N4 DVDDIO Power Digital I/O Supply Voltage (3.3 V).
N15 TRI3 Analog input
Trilevel/bilevel input on the SCART or D-terminal connector. Results are
available via I
2
C. This signal can be buffered and output to the FB_OUT pin.
N16 TRI4 Analog input
Trilevel/bilevel input on the SCART or D-terminal connector. Results are
available via I
2
C. This signal can be buffered and output to the FB_OUT pin.
N17 AIN8 Analog video input Analog Video Input Channel.
N18 AIN9 Analog video input Analog Video Input Channel.
P1 P10 Digital video output Video Pixel Output Port.
P2 P11 Digital video output Video Pixel Output Port.
P3 I2S0/DSD0B/HBR0 Digital output
I
2
S Audio (Channel 1 and Channel 2).
Second DSD Data Channel.
First Block of HBR Stream.
P4 I2S1/DSD1A/HBR1 Digital output
I
2
S Audio (Channel 3 and Channel 4).
Third DSD Data Channel.
Second Block of HBR Stream.
P15 AVDD Power Analog Supply Voltage (1.8 V).
P16 AVDD Power Analog Supply Voltage (1.8 V).
P17 SYNC3 Analog input
Synchronization on green or luma input (SOG/SOY). Used in embedded
synchronization mode. User configurable.
P18 AIN7 Analog video input Analog Video Input Channel.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21

ADV7604BBCZ-5P

Mfr. #:
Buy ADV7604BBCZ-5P
Manufacturer:
Description:
Multimedia ICs Video ICs 12B Deep Color HDMI v1.3 Rcv
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet