OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2688381

P1-P3P4-P6P7-P9P10-P12P13-P14
1Description
AxiolineF digital output module, 8outputs,
24VDC, 2A, 2-wire connection technology
AXL F DO8/2 2A 1H
© PHOENIX CONTACT
Data sheet
The module is designed for use within an AxiolineF station.
It is used to output digital signals.
The outputs are short-circuit and overload-protected .
Features
– 8 digital outputs
–24VDC, 2A
– Connection of actuators in 2-wire technology
– Minimum update time of <150μs
– Device type label stored
– Diagnostic and status indicators
This data sheet is only valid in association with the UMENAXLFSYSINST user manual.
Make sure you always use the latest documentation.
It can be downloaded from the product at phoenixcontact.net/products.
8238_en_04
2016-07-05
AXL F DO8/2 2A 1H
8238_en_04 PHOENIX CONTACT 2 / 14
2Table of contents
1 Description .............................................................................................................................. 1
2 Table of contents ..................................................................................................................... 2
3 Ordering data .......................................................................................................................... 3
4 Technical data ......................................................................................................................... 3
5 Maximum outputs power consumption when inductive loads are switched off ........................ 7
6 Internal circuit diagram ............................................................................................................ 7
7 Terminal point assignment....................................................................................................... 8
8 Connection example................................................................................................................ 8
9 Local diagnostic and status indicators..................................................................................... 9
10 Process data.......................................................................................................................... 10
11 Parameter, diagnostics and information (PDI) ....................................................................... 10
12 Standard objects ................................................................................................................... 11
12.1 Objects for identification (device rating plate)............................................................................ 11
12.2 Object for multilingual capacity.............................................................................................. 12
12.3 Diagnostics objects ............................................................................................................ 12
12.4 Objects for process data management.................................................................................... 13
13 Application objects ................................................................................................................ 14
13.1 Substitute value behavior (FF8Dhex: PD Output Substitute Configuration)....................................... 14
13.2 Message “Actuator supply not present” (FF8Fhex: DiagOut)......................................................... 14
14 Device descriptions ............................................................................................................... 14
AXL F DO8/2 2A 1H
8238_en_04 PHOENIX CONTACT 3 / 14
Description Ty pe Order No. Pcs./Pkt.
AxiolineF, Digital output, Digital outputs: 8, 24 V DC, 2 A, Connection
method: 2-wire, Transmission speed in the local bus 100 MBit/s, Degree of
protection IP20, including bus base module and AxiolineF connectors
AXL F DO8/2 2A 1H 2688381 1
3Ordering data
Accessories Ty pe Order No. Pcs./Pkt.
AxiolineF bus base module for housing type H (Replacement item) AXL F BS H 2700992 5
AxiolineF connector set (for e.g.,AXLFDO8/22A1H) (Replacement
item)
AXL CNS 2L-OBOB/D/UO/E1 2700987 1
Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch,
unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or
CMS-P1-PLOTTER (Marking)
ZB 20,3 AXL UNPRINTED 0829579 25
Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual
labeling with M-PEN 0,8, X-PEN, or CMS-P1-PLOTTER (Marking)
ZBF 10/5,8 AXL UNPRINTED 0829580 50
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK X, THERMOMARK
S1.1, Mounting type: snapped into marker carrier, Lettering field: 35 x 28
mm (Marking)
EMT (35X28)R 0801602 1
Documentation Ty pe Order No. Pcs./Pkt.
User manual, English, AxiolineF: System and installation UM EN AXL F SYS INST - -
User manual, English, Axioline F: Diagnostic registers, and error messages UM EN AXL F SYS DIAG - -
Dimensions (nominal sizes in mm)
Width 35 mm
Height 126.1 mm
Depth 54 mm
Note on dimensions The depth is valid when a TH35-7.5 DIN rail is used (according to EN60715).
4 Technical data
35
54
122,4
126,1
General data
Color traffic grey A RAL 7042
Weight 136 g (with connectors and bus base module)
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
P1-P3P4-P6P7-P9P10-P12P13-P14

2688381

Mfr. #:
Buy 2688381
Manufacturer:
Phoenix Contact
Description:
Terminal Block Interface Modules AXL DO 8/2-2A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet