OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ADZS-BFBLUET-EZEXT

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42
Product Overview
x Bluetooth EZ-Extender Manual
The board extends the capabilities of the Blackfin evaluation system by
providing a connection to the Bluegiga WT12 Bluetooth module.
The board features:
• Bluegiga WT12 Bluetooth module
• Bluetooth radio antenna
• Fully implemented protocol stack
• HCI and iWRAP firmware
• USB interface
• Full speed USB interface for communicating with other
compatible digital devices. The WT12 module acts as
a USB peripheral.
• UART interface
• Standard UART interface for communicating with other
serial devices
• Supports hardware flow control
• Expansion interface
• Allows other EZ-Extenders to be stacked
All of the power necessary to operate the extender is derived from the mat-
ing EZ-KIT Lite/EZ-Board. Before using any of the interfaces, follow the
setup procedure in “Bluetooth EZ-Extender Setup” on page 1-3.
Bluetooth EZ-Extender Manual xi
Preface
Purpose of This Manual
The Bluetooth EZ-Extender Manual describes operation and configuration
of the extender board components. A schematic and a bill of materials are
provided for reference.
Intended Audience
The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture and
instruction set.
Programmers who are unfamiliar with Analog Devices processors can use
this manual but should supplement it with other texts that describe your
target architecture. For the locations of these documents, see “Related
Documents”.
Programmers who are unfamiliar with CrossCore Embedded Studio
®
(CCES) or VisualDSP++
®
should refer to the online help and user’s
manuals.
Manual Contents
The manual consists of:
• Chapter 1, “Using the Bluetooth EZ-Extender” on page 1-1
Provides basic board information.
• Chapter 2, “Bluetooth EZ-Extender Hardware Reference” on
page 2-1
Provides information about the hardware aspects of the board.
What’s New in This Manual
xii Bluetooth EZ-Extender Manual
• Appendix A, “Bluetooth EZ-Extender Bill Of Materials” on
page A-1
Provides a list of components used to manufacture the board.
• Appendix B, “Bluetooth EZ-Extender Schematic” on page B-1
Provides the resources to allow board-level debugging or to use as
a reference guide.
What’s New in This Manual
This is revision 1.1 of the Bluetooth EZ-Extender Manual. The manual has
been updated to include CCES information. In addition, modifications
and corrections based on errata reports against the previous manual revi-
sion have been made.
For the latest version of this manual, please refer to the Analog Devices
Web site.
Technical Support
You can reach Analog Devices processors and DSP technical support in
the following ways:
• Post your questions in the processors and DSP support community
at EngineerZone
®
:
http://ez.analog.com/community/dsp
• Submit your questions to technical support directly at:
http://www.analog.com/support
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42

ADZS-BFBLUET-EZEXT

Mfr. #:
Buy ADZS-BFBLUET-EZEXT
Manufacturer:
Analog Devices Inc.
Description:
Daughter Cards & OEM Boards ADZS-BFBLUET-EZEXT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet