ADZS-BFBLUET-EZEXT Datasheet ADZS-BFBLUET-EZEXT | P25-P27

Bluetooth EZ-Extender Manual 2-3

Bluetooth EZ-Extender Hardware Reference

The board contains a Bluegiga WT12 class 2, a Bluetooth 2.0, and EDR

module, described in “Bluetooth Module” on page 1-4. The EZ-Extender

is equipped with an I

C serial flash memory chip for data storage and

configuration.

Configuration Switch

This section describes the board’s configuration switch (SW1). The switch

location is shown in Figure 2-2.

Figure 2-2. Configuration Switch Location

Configuration Switch

2-4 Bluetooth EZ-Extender Manual

Positions 7 and 8 of the configuration switch enable or disable UART

flow control. Other switch positions are intended for internal Analog

Devices test purposes only and not supported.

By default,

SW1 is all OFF. The switch settings are shown in Table 2-1.

Table 2-1. Configuration Switch (SW1)

SW1 Position UART Flow Control Off UART Flow Control On

SW1.1 OFF OFF

SW1.2 OFF OFF

SW1.3 OFF OFF

SW1.4 OFF OFF

SW1.5 OFF OFF

SW1.6 OFF OFF

SW1.7 OFF ON

SW1.8 OFF ON

Bluetooth EZ-Extender Manual 2-5

Bluetooth EZ-Extender Hardware Reference

Jumpers

This section describes functionality of the configuration jumpers.

Figure 2-3 shows the jumper locations.

Figure 2-3. Jumper Locations

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21 P22-P24 P25-P27 P28-P30 P31-P33 P34-P36 P37-P39 P40-P42

ADZS-BFBLUET-EZEXT

Mfr. #:

Buy ADZS-BFBLUET-EZEXT

Manufacturer:

Analog Devices Inc.

Description:

Daughter Cards & OEM Boards ADZS-BFBLUET-EZEXT

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

ADZS-BFBLUET-EZEXT