2901645 Datasheet 2744610, 2901642, 2901645 | P1-P3

104622_en_04

FL-PP-RJ45... / FL CAT5...

Data Sheet

1Description

The patch panels FL-PP-RJ45... / FL CAT5... provide the

transition from the field cabling to the cabling inside the con-

trol cabinet.

The connection from the patch panel to the termination de-

vice takes place via the RJ45 socket. Pre-assembled patch

cables in different connection lengths from 0.24 m to 20 m

are available for this.

The field cabling is applied easily to spring-cage, screw, or

LSA connection terminal blocks, depending on the version.

The individual terminal blocks are clearly labeled for con-

nection according to Ethernet standard TIA 568 A and B as

well as PROFINET. There is no longer any need to spend

time and effort crimping an RJ45 connector to the field line.

Features

–CAT5e

– 8-pin assignment: 1:1

– 10/100/1000 Mbps

– Mounting on a DIN rail

– Safe connection to ground potential

– FL-PP-RJ45/RJ45-B with extended temperature range

-40 °C ... 85 °C

– Several modes for attaching field cables:

– Spring-cage connection terminal blocks

– Screw connection terminal blocks

– LSA connection terminal blocks

– RJ45-RJ45 transition

– ATEX approval for the following patch panels:

– FL-PP-RJ45-SCC

– FL-PP-RJ45-SC

– FL-PP-RJ45/RJ45

– Shipbuilding approval according to DNV for the follow-

ing patch panel:

– FL-PP-RJ45-SCC

– FL-PP-RJ45-SC

– FL-PP-RJ45-LSA

– FL-PP-RJ45/RJ45

– FL CAT5 TERMINAL BOX

Make sure you always use the latest documentation.

It can be downloaded at phoenixcontact.net/products.

This data sheet is valid for all products listed on the following page:

Ethernet patch panel

FL-PP-RJ45... / FL CAT5...

104622_en_04 PHOENIX CONTACT 2

2Table of contents

1 Description.................................................................................................................................. 1

2 Table of contents ........................................................................................................................ 2

3 Ordering data.............................................................................................................................. 3

4 Technical data ........................................................................................................................... 5

5 Safety regulations and installation notes..................................................................................... 6

5.1 Safety regulations for installation in potentially explosive areas (only FL-PP-RJ45-SCC, FL-PP-RJ45-SC, and

FL-PP-RJ45/RJ45)......................................................................................................................................... 6

6 Patch panel FL-PP-RJ45-SCC with spring-cage connection terminal blocks ............................. 7

6.1 Design............................................................................................................................................................ 7

6.2 Dimensions .................................................................................................................................................... 7

6.3 Connecting the Ethernet network ................................................................................................................... 7

7 Patch panel FL-PP-RJ45-SC with screw connection terminal blocks ......................................... 8

7.1 Design............................................................................................................................................................ 8

7.2 Dimensions .................................................................................................................................................... 8

7.3 Connecting the Ethernet network ................................................................................................................... 8

8 Patch panel FL-PP-RJ45-LSA with LSA connection terminal blocks .......................................... 9

8.1 Design............................................................................................................................................................ 9

8.2 Dimensions .................................................................................................................................................... 9

8.3 Connecting the Ethernet network ................................................................................................................... 9

9 Patch panel FL-PP-RJ45/RJ45 with RJ45 socket......................................................................10

9.1 Design.......................................................................................................................................................... 10

9.2 Dimensions .................................................................................................................................................. 10

9.3 Connecting the Ethernet network ................................................................................................................. 10

10 Patch panel FL-PP-RJ45/RJ45-B with RJ45 socket, slim design width .....................................11

10.1 Dimensions ..................................................................................................................................................11

10.2 Connecting the Ethernet network .................................................................................................................11

11 Patch panel FL CAT5 TERMINAL BOX with screw connection terminal blocks.........................12

11.1 Design.......................................................................................................................................................... 12

11.2 Dimensions ..................................................................................................................................................12

11.3 Connecting the Ethernet network .................................................................................................................12

12 Shield grounding selection.........................................................................................................13

13 Circuit diagrams ................................................................................................................................................... 13

FL-PP-RJ45... / FL CAT5...

104622_en_04 PHOENIX CONTACT 3

3Ordering data

Products

Description Type Order No. Pcs. / Pkt.

Patch panel, one RJ45 socket to 8 spring-cage connection terminal blocks

(1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option

of shield contacting on DIN rail via jumpers

FL-PP-RJ45-SCC 2901642 1

Patch panel, one RJ45 socket to 8 screw connection terminal blocks

(1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option

of shield contacting on DIN rail via jumpers

FL-PP-RJ45-SC 2901643 1

Patch panel, one RJ45 socket to 8 LSA connection terminal blocks

(1:1 assignment), CAT5e, 10/100/1000 Mbps, DIN rail mounting, IP20, option

of shield contacting on DIN rail via jumpers

FL-PP-RJ45-LSA 2901645 1

Patch panel, two RJ45 sockets (1:1 assignment), CAT5e, 10/100/1000 Mbps,

DIN rail mounting, IP20, option of shield contacting on DIN rail via jumpers

FL-PP-RJ45/RJ45 2901646 1

Patch panel, slim design width, extended temperature range, two RJ45 sock-

ets, 1:1 assignment, continuous shield, CAT5, 10/100/1000 Mbps, DIN rail

mounting, IP20

FL-PP-RJ45/RJ45-B 2904933 1

Patch panel, one RJ45 socket to 4 screw connection terminal blocks (assign-

ment 1, 2, 3, 6), CAT5, 10/100 Mbps, DIN rail mounting, IP20, shield contact-

ing on DIN rail

FL CAT5 TERMINAL BOX 2744610 1

Accessories

Description Type Order No. Pcs. / Pkt.

Network isolators

Passive network isolator for electrical isolation in Ethernet networks. For the

protection of Ethernet devices against potential differences up to 4 kV. Can be

used for transmission speeds of up to 100 Mbps. Connection via RJ45 and

COMBICON plug-in screw terminal block.

FL ISOLATOR 100-RJ/SC 2313928 1

Passive network isolator for electrical isolation in Ethernet networks. For the

protection of Ethernet devices against potential differences up to 4 kV. Can be

used for transmission speeds of up to 100 Mbps. Connection for two RJ45

connectors possible.

FL ISOLATOR 100-RJ/RJ 2313931 1

Passive network isolator for electrical isolation in Ethernet networks. For the

protection of Ethernet devices against potential differences up to 4 kV. Can be

used for transmission speeds of up to 1 Gbps. Connection for two RJ45 con-

nectors possible.

FL ISOLATOR 1000-RJ/RJ 2313915 1

Passive network isolator for electrical isolation in Ethernet networks. For the

protection of Ethernet devices against potential differences up to 4 kV. Can be

used for transmission speeds up to 100 Mbps. Ethernet connection via two

M12 sockets (D-coded).

FL ISOLATOR 100-M12 2902985 1

Passive network isolator with pre-installed adapter for mounting on a DIN rail.

Electrical isolation in Ethernet networks. For protection against potential differ-

ences up to 4 kV. Transmission speed of up to 100 Mbps. M12 socket

(D-coded).

FL ISOLATOR 100-M12 RMS 2904671 1

Patch cables, CAT5

Pre-assembled, 0.24 m FL CAT5 PATCH 0.24 2700301 10

Pre-assembled, 0.3 m FL CAT5 PATCH 0.3 2832250 10

Pre-assembled, 0.5 m FL CAT5 PATCH 0.5 2832263 10

Pre-assembled, 1.0 m FL CAT5 PATCH 1.0 2832276 10

Pre-assembled, 1.5 m FL CAT5 PATCH 1.5 2832221 10

Pre-assembled, 2.0 m FL CAT5 PATCH 2.0 2832289 10

Pre-assembled, 3.0 m FL CAT5 PATCH 3.0 2832292 10

Pre-assembled, 5.0 m FL CAT5 PATCH 5.0 2832580 10

Pre-assembled, 7.5 m FL CAT5 PATCH 7.5 2832616 10

Pre-assembled, 10.0 m FL CAT5 PATCH 10.0 2832629 10

P1-P3 P4-P6 P7-P9 P10-P12 P13-P13

2901645

Mfr. #:

Buy 2901645

Manufacturer:

Phoenix Contact

Description:

Modular Connectors / Ethernet Connectors FL-PP-RJ45-LSA

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

2901645

2901645

Products related to this Datasheet