LPC2210_2220_6 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 06 — 11 December 2008 20 of 50
NXP Semiconductors
LPC2210/2220
16/32-bit ARM microcontrollers
6.7 Pin function select register 1 (PINSEL1 - 0xE002 C004)
The PINSEL1 register controls the functions of the pins as per the settings listed in
Table 8. The direction control bit in the IODIR register is effective only when the GPIO
function is selected for a pin. For other functions direction is controlled automatically.
Settings other than those shown in the Table 8 are reserved, and should not be used.
31:30 P0.15 0 0 GPIO Port 0.15 0
0 1 RI1 (UART1)
1 0 EINT2
1 1 reserved
Table 7. Pin function select register 0 (PINSEL0 - 0xE002 C000)
…continued
PINSEL0 Pin name Value Function Value after reset
Table 8. Pin function select register 1 (PINSEL1 - 0xE002 C004)
PINSEL1 Pin name Value Function Value after reset
1:0 P0.16 0 0 GPIO Port 0.16 0
0 1 EINT0
1 0 Match 0.2 (Timer 0)
1 1 Capture 0.2 (Timer 0)
3:2 P0.17 0 0 GPIO Port 0.17 0
0 1 Capture 1.2 (Timer 1)
1 0 SCK (SPI1)
1 1 Match 1.2 (Timer 1)
5:4 P0.18 0 0 GPIO Port 0.18 0
0 1 Capture 1.3 (Timer 1)
1 0 MISO (SPI1)
1 1 Match 1.3 (Timer 1)
7:6 P0.19 0 0 GPIO Port 0.19 0
0 1 Match 1.2 (Timer 1)
1 0 MOSI (SPI1)
1 1 Capture 1.2 (Timer 1)
9:8 P0.20 0 0 GPIO Port 0.20 0
0 1 Match 1.3 (Timer 1)
1 0 SSEL (SPI1)
1 1 EINT3
11:10 P0.21 0 0 GPIO Port 0.21 0
0 1 PWM5
1 0 reserved
1 1 Capture 1.3 (Timer 1)
13:12 P0.22 0 0 GPIO Port 0.22 0
0 1 reserved
1 0 Capture 0.0 (Timer 0)
1 1 Match 0.0 (Timer 0)