NC
ANODE
CATHODE
NC
V
CC
V
B
V
O
GND
HCPL-4701/070A
V
O2
V
O1
V
CC
GND
ANODE
1
CATHODE
1
CATHODE
2
ANODE
2
7
5
6
8
2
3
4
1
TRUTH TABLE
LED
ON
OFF
V
O
LOW
HIGH
7
5
6
8
2
3
4
1
HCPL-4731/073A
Features
Ultra low input current capability - 40 µA
Specified for 3 V operation
Typical power consumption: <1 mW
Input power: <50 µW
Output power: <500 µW
•Will operate with V
CC
as low as 1.6 V
High current transfer ratio: 3500% at I
F
= 40 µA
TTL and CMOS compatible output
Specified ac and dc performance over temperature:
0°C to 70°C
Safety approval:
UL recognized – 3750 V rms for 1 minute and
5000 V rms* for 1 minute per UL1577
CSA approved
IEC/EN/DIN EN 60747-5-2 approved with
V
IORM
= 630 V peak
(Option 060) for HCPL-4701
8-pin product compatible with 6N138/6N139 and
HCPL-2730/HCPL-2731
Available in 8-Pin DIP and SOIC-8 footprint
Through hole and surface mount assembly available
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
Functional Diagram
*5000 V rms/1 Minute rating is for Option 020 (HCPL-4701 and HCPL-4731) products only.
A 0.1 µF bypass capacitor connected between pins 8 and 5 is recommended.
Applications
Battery operated applications
ISDN telephone interface
Ground isolation between logic families – TTL, LSTTL,
CMOS, HCMOS, HL-CMOS, LV-HCMOS
Low input current line receiver
EIA RS-232C line receiver
Telephone ring detector
AC line voltage status indicator – low input power
dissipation
Low power systems – ground isolation
Portable system I/O interface
HCPL-4701/-4731/-070A/-073A
Very Low Power Consumption High Gain Optocouplers
Data Sheet
2
Description
These devices are very low power consumption, high
gain single and dual channel optocouplers. The
HCPL-4701 represents the single channel 8-Pin DIP
configuration and is pin compatible with the industry
standard 6N139. The HCPL-4731 represents the dual
channel 8-Pin DIP configuration and is pin
compatible with the popular standard HCPL-2731.
The HCPL-070A and HCPL-073A are the equivalent
single and dual channel products in an SO-8 footprint.
Each channel can be driven with an input current as
low as 40 µA and has a typical current transfer ratio of
3500%.
These high gain couplers use an AlGaAs LED and an
integrated high gain photodetector to provide an
extremely high current transfer ratio between input
and output. Separate pins for the photodiode and
output stage results in TTL compatible saturation
voltages and high speed operation. Where desired, the
V
CC
and V
O
terminals may be tied together to achieve
conventional Darlington operation (single channel
package only).
These devices are designed for use in CMOS, LSTTL
or other low power applications. They are especially
well suited for ISDN telephone interface and battery
operated applications due to the low power
consumption. A 700% minimum current transfer ratio
is guaranteed from 0°C to 70°C operating temperature
range at 40 µA of LED current and V
CC
3V.
The SO-8 does not require “through holes” in a PCB.
This package occupies approximately one-third the
footprint area of the standard dual-in-line package.
The lead profile is designed to be compatible with
standard surface mount processes.
Selection Guide
Widebody
8-Pin DIP Package Hermetic
(300 Mil) Small Outline SO-8 (400 mil) Single and
Dual Single Dual Minimum Absolute Dual
Single Channel Channel Channel Single Input ON Maxi- Channel
Channel Package Package Package Channel Current Minimum mum Packages
Package HCPL- HCPL- HCPL- Package (I
F
) CTR V
CC
HCPL-
6N139
[1]
2731
[1]
0701
[1]
0731
[1]
HCNW139
[1]
0.5 mA 400% 18 V
6N138
[1]
2730
[1]
0700
[1]
0730
[1]
HCNW138
[1]
1.6 mA 300% 7 V
HCPL-4701 4731 070A 0730A 40 µA 800% 18 V
0.5 mA 300% 20 V 5701
[1]
5700
[1]
5731
[1]
5730
[1]
Notes:
1. Technical data are on separate Avago publication.
3
Ordering Information
HCPL-4701, HCPL-4731, HCPL-070A and HCPL-073A are UL Recognized with 3750 Vrms for 1 minute per
UL1577 and are approved under CSA Component Acceptance Notice #5, File CA 88324.
Option
Part RoHS non RoHS Surface Gull Tape UL 5000 Vrms/ IEC/EN/DIN
Number Compliant Compliant Package Mount Wing & Reel 1 Minute rating EN 60747-5-2 Quantity
-000E no option 300 mil DIP-8 50 per tube
-300E -300 X X 50 per tube
-500E -500 X X X 1000 per reel
HCPL-4701
-020E -020 X 50 per tube
HCPL-4731
-320E -320 X X X 50 per tube
-520E -520 X X X X 1000 per reel
-060E -060 X 50 per tube
-360E -360 X X X 50 per tube
-560E -560 X X X X 1000 per reel
-000E no option SO-8 100 per tube
HCPL-070A
-500E -500 X X X 1500 per reel
HCPL-073A
-060E -060 X 100 per tube
-560E -560 X X X X 1500 per reel
To order, choose a part number from the part number column and combine with the desired option from
the option column to form an order entry.
Example 1:
HCPL-4701-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel
packaging with IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-070A to order product of Surface Mount Small Outline SO-8 package and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for
information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July
15, 2001 and RoHS compliant will use ‘–XXXE.’

HCPL-4731#300

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
High Speed Optocouplers 2Ch 10mA 600mW
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union