For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. Obsoletes AV01-0507EN
AV02-1505EN - January 28, 2013
Receiver Electrical Characteristics
Parameter Symbol Min Typ Max Unit Notes
Data Output Voltage - Low V
OL
-V
cc
-1.63 V
Data Output Voltage - High V
OH
-V
cc
-0.99 V
Data Output Voltage Swing |V
OH
-V
OL
| 400 800 mV single ended
Data Output Rise Time t
r
1.45 2.20 ns
Data Output Fall Time t
f
0.98 2.20 ns
Duty Cycle Distortion DCD -1 +1 ns peak to peak
Data Dependent Jitter (rise/fall) DDJ 0.6 1.5 ns peak to peak
Random Jitter RJ 0.1 0.2 ns peak to peak
Signal Detect Output Voltage - Low V
OL
-V
cc
-2.2 -1.63 -1.5 V
Signal Detect Output Voltage - High V
OH
-V
cc
-1.2 -0.99 -0.7 V
Receiver Optical Characteristics
Parameter Symbol Min Typ Max Unit Notes
Unstressed receiver sensitivity, OMA (POF) OMA -22.5 -25 dBm peak-peak, note 9
Unstressed receiver sensitivity, OMA (HCS) OMA -26.3 -29.3 dBm peak-peak, note 9
Input Optical Power Maximum, OMA (POF) P
IN MAX
+1 dBm peak-peak, note 10
Input Optical Power Maximum, OMA (HCS) P
IN MAX
-4 dBm peak-peak, note 10
Operating Wavelength
R
635 650 660 nm
Signal Detect Asserted P
A
2 dB note 11
Signal Detect De-asserted P
D
5 dB note 11
Signal Detect Hysteresis P
A
- P
D
1.5 3 dB
Notes:
9. Measured with PRBS 2
7
-1 sequence, BER < 2.5x10
-10
.
10. Input Optical Power Maximum is dened as the maximum optical modulation amplitude where the receiver duty cycle distortion reaches ±1
ns.
11. Signal Detect Asserted and De-asserted levels are indicated as dB below unstressed receiver sensitivity level for either POF or HCS.
