9
Table 4. EEPROM DMI Memory Contents – Address A2h
Addr Hex Dec Description Addr Hex Dec Description
0 73 115 Temp H alarm MSB
[1,5]
95 Checksum for bytes 0 to 94
[7]
1 00 0 Temp H alarm LSB
[1,5]
96 Real time temperature MSB
[1]
2 D8 216 Temp L alarm MSB
[1,5]
97 Real time temperature LSB
[1]
3 00 0 Temp L alarm LSB
[1,5]
98 Real time Vcc MSB
[2]
4 69 105 Temp H warning MSB
[1,5]
99 Real time Vcc LSB
[2]
5 00 0 Temp H warning LSB
[1,5]
100 to 109 Reserved
[8]
6 E7 231 Temp L warning MSB
[1,5]
110 Status control - see table 5
7 00 0 Temp L warning LSB
[1,5]
111 Reserved
[8]
8 98 152 Vcc H alarm MSB
[2,5]
112 Flag bit - see table 6
9 58 88 Vcc H alarm LSB
[2,5]
113 Flag bit - see table 6
10 69 105 Vcc L alarm MSB
[2,5]
114 Reserved
[8]
11 78 120 Vcc L alarm LSB
[2,5]
115 Reserved
[8]
12 8D 141 Vcc H warning MSB
[2,5]
116 Flag bit - see table 6
13 CC 204 Vcc H warning LSB
[2,5]
117 Flag bit - see table 6
14 74 116 Vcc L warning MSB
[2,5]
118 Reserved
[8]
15 04 4 Vcc L warning LSB
[2,5]
119 to 127 Vendor specic
16 to 39 Reserved
[8]
128 to 247 Customer writable
40 08 8 Rx OMA Margin L alarm
[3,4,5]
248 to 255 Vendor specic
41 12 18 Rx OMA Margin L warning
[3,4,5]
42 to 55 Reserved
[8]
Notes:
1. Temperature (Temp) is decoded as a 16 bit signed twos complement integer in increments of 1/256 °C.
2. Supply voltage (Vcc) is decoded as a 16 bit unsigned integer in increments of 100 µV.
3. Received optical modulation amplitude margin or Rx OMA margin is a measure for the reserve in OMA to Sensitivity.
4. Received OMA margin is decoded as an 8 bit signed twos compliment integer in increments of 0.2 dB.
5. This register is read only. A write will be acknowledged but not stored.
6. Bytes 56-94 are not intended for use with AFBR-5978Z, but have been set to default values per SFF-8472.
7. Byte 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment.
8. Reserved registers will return “00” when read. A write to a reserved register will be acknowledged but not stored.