5．5．Quality level
5-1.Applied standard(ISO2859-1)
5-2.Sampling inspection A single normal sampling plan, level S-4.
5-3.Inspection items and defect criteria
No. AQL
1
2
3
4
0.4
0.1
Item Defect criteria
No radiation
Electro-optical
characteristics
External
dimensions
Appearance
Classification
Major
defect
No light emitting
Not conforming to the specification
Not conforming to the specification
(Forward voltage, Luminous flux and Chromaticity values)
Nonconformity observed in product appearance is determined
as defective only when electro-optical characteristics is affected by.
<If any question arises regardless of above mentioned criterion>
■Foreign material, scratch, or bubble at emitting area: 0.8 mm φ
■Fiber generation at emitting area: 0.2 mm in width and 2.5 mm in length
■Foreign material at connection terminal: 0.8 mm φ
■Substrate burr on edge: Over dimension tolerance
(Note) Products with removable foreign material attached on are not determined to be defective.
(Note) Substrate cracks that do not effect the electrical/optical charecteristics are not determined to be defective.
Major
defect
sharp LDE-E15-4-16-B
Model No. GW6B*G**HD6
8
“Contents in this technical document be changed without any notice due to the product modification.”
http://www.sharp-world.com/products/device/
