8735BI-21 DATA SHEET
700MHZ, DIFFERENTIAL-TO-3.3V LVPECL ZERO DELAY
CLOCK GENERATOR
16 REVISION 1 1/27/15
Package Outline - K Suffix for 32 Lead VFQFN
Table 9B. Package Dimensions
JEDEC Variation: VHHD-2/-4
All Dimensions in Millimeters
Sym
bol Minimum Nominal Maximum
N 32
A 0.80 1.00
A1 0 0.05
A3 0.25 Ref.
b 0.18 0.25 0.30
N
D
& N
E
8
D & E 5.00 Basic
D2 & E2 3.0 3.3
e 0.50 Basic
L 0.30 0.40 0.50
NOTE: The following package mechanical drawing is a generic
dra
wing that applies to any pin count VFQFN package. This drawing
is not intended to convey the actual pin count or pin layout of this
device. The pin count and pin-out are shown on the front page. The
package dimensions are in Table 9B.
Reference Document: JEDEC Publication 95, MO-220
To p View
Index Area
D
Chamfer 4x
0.6 x 0.6 max
OPTIONAL
Anvil
Singula tion
A
0. 08 C
C
A3
A1
S eating Plan e
E2
E2
2
L
(N
-1)x e
(Ref.)
(Ref.)
N & N
Even
N
e
D2
2
D2
(Ref.)
N & N
Odd
1
2
e
2
(Ty p.)
If N & N
are Even
(N -1)x e
(Re f.)
b
Th er mal
Base
N
OR
Anvil
Singulation
N-1N
CHAMFER
1
2
N-1
1
2
N
RADIUS
4
4
Bottom View w/Type C IDBottom View w/Type A ID
There are 2 methods of indicating pin 1 corner at the back of the VFQFN package:
1. Type A: Chamfer on the paddle (near pin 1)
2. Type C: Mouse bite on the paddle (near pin 1)
REVISION 1 1/27/15 17 700MHZ, DIFFERENTIAL-TO-3.3V LVPECL ZERO DELAY
CLOCK GENERATOR
8735BI-21 DATA SHEET
Ordering Information
Table 10. Ordering Information
NOTE: Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
Part/Order Number Marking Package Shipping Packaging Temperature
8735BMI-21LF 8735BMI-21LF 20 Lead SOIC, Lead-Free Tube -40°C to 85°C
8735BMI-21LFT 8735BMI-21LF 20 Lead SOIC, Lead-Free Tape & Reel -40°C to 85°C
8735BKI-21LF 735BI21L 32 Lead VFQFN, Lead-Free Tray -40°C to 85°C
8735BKI-21LFT 735BI21L 32 Lead VFQFN, Lead-Free Tape & Reel -40°C to 85°C
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in
this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined
in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether
express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This
document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) assumes no responsibility for either its use or for the infringement of any patents or
other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as
those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any
circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected
names, logos and designs, are the property of IDT or their respective third party owners.
Copyright ©2015 Integrated Device Technology, Inc.. All rights reserved.
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com
Tech Support
email: clocks@idt.com

8735BMI-21LFT

Mfr. #:
Manufacturer:
IDT
Description:
Clock Generators & Support Products 700MHz, Differential 3.3V LVPECL Zero
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet