OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AFBR-57J5APZ

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
13
Table 12. EEPROM Serial ID Memory Contents – Conventional SFP Memory (Address A0h)
Byte #
Decimal
Data
Hex
Notes Byte #
Decimal
Data
Hex
Notes
0 03 SFP physical device 37 00 Hex Byte of Vendor OUI 1
1 04 SFP function dened by serial ID only 38 17 Hex Byte of Vendor OUI 1
2 07 LC optical connector 39 6A Hex Byte of Vendor OUI 1
3 00 40 41 “A” - Vendor Part Number ASCII character
4 00 41 46 “F” - Vendor Part Number ASCII character
5 00 42 42 “B” - Vendor Part Number ASCII character
6 00 43 52 “R” - Vendor Part Number ASCII character
7 20 Intermediate distance (per FC-PI) 44 2D “-” - Vendor Part Number ASCII character
8 40 Shortwave laser w/o OFC (open ber control) 45 35 “5” - Vendor Part Number ASCII character
9 0C Multi-mode 50um and 62.5um optical media 46 37 “7” - Vendor Part Number ASCII character
10 00 47 4A “J” - Vendor Part Number ASCII character
11 01 Compatible with 8B/10B encoded data 48 35 “5” - Vendor Part Number ASCII character
12 1F 3100 MBit/sec nominal bit rate (3.072 Gbit/s) 49 41 “A” - Vendor Part Number ASCII character
13 00 50 50 “ P” - Vendor Part Number ASCII character
14 00 51 5A “ Z” - Vendor Part Number ASCII character
15 00 52 20 “ ” - Vendor Part Number ASCII character
16 19 250m of 50/125um OM2 ber @ 3.1GBit/sec 53 20 “ ” - Vendor Part Number ASCII character
17 0D 125m of 62.5/125um OM1 ber @ 3.1GBit/sec 54 20 “ ” - Vendor Part Number ASCII character
18 00 55 20 “ ” - Vendor Part Number ASCII character
19 28 400m of 50/125um OM3 ber @ 3.1GBit/sec 56 20 “ ” - Vendor Part Number ASCII character
20 41 “A” - Vendor Name ASCII character 57 20 “ ” - Vendor Part Number ASCII character
21 56 “V” - Vendor Name ASCII character 58 20 “ ” - Vendor Part Number ASCII character
22 41 “A” - Vendor Name ASCII character 59 20 “ ” - Vendor Part Number ASCII character
23 47 “G” - Vendor Name ASCII character 60 03 Hex Byte of Laser Wavelength
[2]
24 4F “O” - Vendor Name ASCII character 61 52 Hex Byte of Laser Wavelength
[2]
25 20 “ ” - Vendor Name ASCII character 62 00
26 20 “ ” - Vendor Name ASCII character 63 Checksum for Bytes 0-62
[3]
27 20 “ ” - Vendor Name ASCII character 64 00
28 20 “ ” - Vendor Name ASCII character 65 1A Hardware SFP TX_DISABLE, TX_FAULT &
RX_LOS
29 20 “ ” - Vendor Name ASCII character 66 00
30 20 “ ” - Vendor Name ASCII character 67 50 80% below nominal rate tolerated (0.614
Gb/s)
31 20 “ ” - Vendor Name ASCII character 68-83 Vendor Serial Number ASCII characters
[4]
32 20 “ ” - Vendor Name ASCII character 84-91 Vendor Date Code ASCII characters
[5]
33 20 “ ” - Vendor Name ASCII character 92 68 Digital Diagnostics, Internal Cal, Rx Pwr Avg
34 20 “ ” - Vendor Name ASCII character 93 F0 A/W, Soft SFP TX_DISABLE, TX_FAULT &
RX_LOS
35 20 “ ” - Vendor Name ASCII character 94 03 SFF-8472 Compliance to revision 10
36 00 95 Checksum for Bytes 64-94
[3]
96 - 255 00
Notes:
1. The IEEE Organizationally Unique Identier (OUI) assigned to Avago Technologies is 00-17-6A (3 bytes of hex).
2. Laser wavelength is represented in 16 unsigned bits. The hex representation of 850 (nm) is 0352.
3. Addresses 63 and 95 are checksums calculated (per SFF-8472 and SFF-8074) and stored prior to product shipment.
4. Addresses 68-83 specify the AFBR-57J5APZ ASCII serial number and will vary on a per unit basis.
5. Addresses 84-91 specify the AFBR-57J5APZ ASCII date code and will vary on a per date code basis.
14
Table 13. EEPROM Serial ID Memory Contents – Enhanced Feature Set Memory (Address A2h)
Byte #
Decimal Notes
Byte #
Decimal Notes
Byte #
Decimal Notes
0 Temp H Alarm MSB
[1]
26 Tx Pwr L Alarm MSB
[4]
104 Real Time Rx Pwr MSB
[5]
1 Temp H Alarm LSB
[1]
27 Tx Pwr L Alarm LSB
[4]
105 Real Time Rx Pwr LSB
[5]
2 Temp L Alarm MSB
[1]
28 Tx Pwr H Warning MSB
[4]
106 Reserved
3 Temp L Alarm LSB
[1]
29 Tx Pwr H Warning LSB
[4]
107 Reserved
4 Temp H Warning MSB
[1]
30 Tx Pwr L Warning MSB
[4]
108 Reserved
5 Temp H Warning LSB
[1]
31 Tx Pwr L Warning LSB
[4]
109 Reserved
6 Temp L Warning MSB
[1]
32 Rx Pwr H Alarm MSB
[5]
110 Status/Control - See
Table 14
7 Temp L Warning LSB
[1]
33 Rx Pwr H Alarm LSB
[5]
111 Reserved
8 Vcc H Alarm MSB
[2]
34 Rx Pwr L Alarm MSB
[5]
112 Flag Bits - See Table 15
9 Vcc H Alarm LSB
[2]
35 Rx Pwr L Alarm LSB
[5]
113 Flag Bits - See Table 15
10 Vcc L Alarm MSB
[2]
36 Rx Pwr H Warning MSB
[5]
114 Reserved
11 Vcc L Alarm LSB
[2]
37 Rx Pwr H Warning LSB
[5]
115 Reserved
12 Vcc H Warning MSB
[2]
38 Rx Pwr L Warning MSB
[5]
116 Flag Bits - See Table 15
13 Vcc H Warning LSB
[2]
39 Rx Pwr L Warning LSB
[5]
117 Flag Bits - See Table 15
14 Vcc L Warning MSB
[2]
40-55 Reserved 118-127 Reserved
15 Vcc L Warning LSB
[2]
56-94 External Calibration Constants
[6]
128-247 Customer Writeable
16 Tx Bias H Alarm MSB
[3]
95 Checksum for Bytes 0-94
[7]
248-255 Vendor Specic
17 Tx Bias H Alarm LSB
[3]
96 Real Time Temperature MSB
[1]
18 Tx Bias L Alarm MSB
[3]
97 Real Time Temperature LSB
[1]
19 Tx Bias L Alarm LSB
[3]
98 Real Time Vcc MSB
[2]
20 Tx Bias H Warning MSB
[3]
99 Real Time Vcc LSB
[2]
21 Tx Bias H Warning LSB
[3]
100 Real Time Tx Bias MSB
[3]
22 Tx Bias L Warning MSB
[3]
101 Real Time Tx Bias LSB
[3]
23 Tx Bias L Warning LSB
[3]
102 Real Time Tx Power MSB
[4]
24 Tx Pwr H Alarm MSB
[4]
103 Real Time Tx Power LSB
[4]
25 Tx Pwr H Alarm LSB
[4]
Notes:
1. Temperature (Temp) is decoded as a 16 bit signed twos compliment integer in increments of 1/256 degrees C.
2. Supply Voltage (Vcc) is decoded as a 16 bit unsigned integer in increments of 100 uV.
3. Laser bias current (Tx Bias) is decoded as a 16 bit unsigned integer in increments of 2 uA.
4. Transmitted average optical power (Tx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 uW.
5. Received average optical power (Rx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 uW.
6. Bytes 55-94 are not intended for use with AFBR-57J5APZ, but have been set to default values per SFF-8472.
7. Byte 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment.
15
Table 14. EEPROM Serial ID Memory Contents – Soft Commands (Address A2h, Byte 110)
Bit # Status/Control Name Description Notes
7 TX_ DISABLE State Digital state of SFP TX_ DISABLE Input Pin (1 = TX_DISABLE asserted) Note 1
6 Soft TX_ DISABLE Read/write bit for changing digital state of TX_DISABLE function Note 1,2
5 reserved
4 reserved
3 reserved
2 TX_FAULT State Digital state of the SFP TX_FAULT Output Pin (1 = TX_FAULT asserted) Note 1
1 RX_LOS State Digital state of the SFP RX_LOS Output Pin (1 = RX_LOS asserted) Note 1
0 Data Ready (Bar) Indicates transceiver is powered and real time sense data is ready. (0 =
Ready)
Note 1
Notes:
1. The response time for soft commands of the AFBR-57J5APZ is 100 msec as specied by the MSA SFF-8472
2. Bit 6 is logic OR’d with the SFP TX_DISABLE input pin 3 ... either asserted will disable the SFP transmitter.
Table 15. EEPROM Serial ID Memory Contents – Alarms and Warnings (Address A2h, Bytes 112, 113, 116, 117)
Byte Bit Flag Bit Name Description
112 7 Temp High Alarm Set when transceiver internal temperature exceeds high alarm threshold.
6 Temp Low Alarm Set when transceiver internal temperature exceeds low alarm threshold.
5 Vcc High Alarm Set when transceiver internal supply voltage exceeds high alarm threshold.
4 Vcc Low Alarm Set when transceiver internal supply voltage exceeds low alarm threshold.
3 Tx Bias High Alarm Set when transceiver laser bias current exceeds high alarm threshold.
2 Tx Bias Low Alarm Set when transceiver laser bias current exceeds low alarm threshold.
1 Tx Power High Alarm Set when transmitted average optical power exceeds high alarm threshold.
0 Tx Power Low Alarm Set when transmitted average optical power exceeds low alarm threshold.
113 7 Rx Power High Alarm Set when received average optical power exceeds high alarm threshold.
6 Rx Power Low Alarm Set when received average optical power exceeds low alarm threshold.
0-5 reserved
116 7 Temp High Warning Set when transceiver internal temperature exceeds high warning threshold.
6 Temp Low Warning Set when transceiver internal temperature exceeds low warning threshold.
5 Vcc High Warning Set when transceiver internal supply voltage exceeds high warning threshold.
4 Vcc Low Warning Set when transceiver internal supply voltage exceeds low warning threshold.
3 Tx Bias High Warning Set when transceiver laser bias current exceeds high warning threshold.
2 Tx Bias Low Warning Set when transceiver laser bias current exceeds low warning threshold.
1 Tx Power High Warning Set when transmitted average optical power exceeds high warning threshold.
0 Tx Power Low Warning Set when transmitted average optical power exceeds low warning threshold.
117 7 Rx Power High Warning Set when received average optical power exceeds high warning threshold.
6 Rx Power Low Warning Set when received average optical power exceeds low warning threshold.
0-5 reserved
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

AFBR-57J5APZ

Mfr. #:
Buy AFBR-57J5APZ
Manufacturer:
Description:
Fiber Optic Transmitters, Receivers, Transceivers MM BTS SFP Ind-Temp RoHS
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet