DS1972
1024-Bit EEPROM i
Button
22 ______________________________________________________________________________________
Memory Function Example
Write to the first 8 bytes of memory page 1. Read the
entire memory.
With only a single DS1972 connected to the bus mas-
ter, the communication looks like this:
MASTER MODE DATA (LSB FIRST) COMMENTS
Tx (Reset) Reset pulse
Rx (Presence) Presence pulse
Tx CCh Issue “Skip ROM” command
Tx 0Fh Issue “Write Scratchpad” command
Tx 20h TA1, beginning offset = 20h
Tx 00h TA2, address = 0020h
Tx <8 Data Bytes> Write 8 bytes of data to scratchpad
Rx <2 Bytes CRC-16> Read CRC to check for data integrity
Tx (Reset) Reset pulse
Rx (Presence) Presence pulse
Tx CCh Issue “Skip ROM” command
Tx AAh Issue “Read Scratchpad” command
Rx 20h Read TA1, beginning offset = 20h
Rx 00h Read TA2, address = 0020h
Rx 07h Read E/S, ending offset = 111b, AA, PF = 0
Rx <8 Data Bytes> Read scratchpad data and verify
Rx <2 Bytes CRC-16> Read CRC to check for data integrity
Tx (Reset) Reset pulse
Rx (Presence) Presence pulse
Tx CCh Issue “Skip ROM” command
Tx 55h Issue “Copy Scratchpad” command
Tx 20h TA1
Tx 00h TA2
Tx 07h E/S
(AUTHORIZATION CODE)
— <1-Wire Idle High> Wait t
PROGMAX
for the copy function to complete
Rx AAh Read copy status, AAh = success
Tx (Reset) Reset pulse
Rx (Presence) Presence pulse
Tx CCh Issue “Skip ROM” command
Tx F0h Issue “Read Memory” command
Tx 00h TA1, beginning offset = 00h
Tx 00h TA2, address = 0000h
Rx <144 Data Bytes> Read the entire memory
Tx (Reset) Reset pulse
Rx (Presence) Presence pulse
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
F3 i
Button
IB+3NT
21-0252
F5 i
Button
IB+5NT
21-0266
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the
package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
