OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

IS64C25616AL-12CTLA3-TR

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17
Integrated Silicon Solution, Inc. — www.issi.com —
1-800-379-4774
13
Rev. C
03/21/2008
IS61C25616AL IS61C25616AS
IS64C25616AL IS64C25616AS
DATA RETENTION SWITCHING CHARACTERISTICS (LOW POWER) (IS61/64C25616AS)
Symbol Parameter Test Condition Min. Max. Unit
VDR VDD for Data Retention See Data Retention Waveform 2.9 5.5 V
IDR Data Retention Current VDD = 2.9V, CE ≥ V DD – 0.2V Com. — 0.8
mA
VIN ≥ VDD – 0.2V, or VIN
≤
VSS + 0.2V
Ind. — 0.9
Auto. — 2
typ.
(1)
0.2
tSDR Data Retention Setup Time See Data Retention Waveform 0 — ns
tRDR Recovery Time See Data Retention Waveform tRC —ns
Note:
1. Typical Values are measured at V
DD
= 5V, T
A
= 25
o
C and not 100% tested.
DATA RETENTION WAVEFORM (
CECE
CECE
CE Controlled)
VDD
CE ≥ VDD
- 0.2V
t
SDR
t
RDR
V
DR
CE
GND
4.5V
Data Retention Mode
14
Integrated Silicon Solution, Inc. — www.issi.com
Rev. C
03/21/2008
IS61C25616AL IS61C25616AS
IS64C25616AL IS64C25616AS
Automotive Range: –40°C to +125°C
Speed (ns) Order Part No. Package
12 IS64C25616AL-12KA3 400-mil Plastic SOJ
IS64C25616AL-12TA3 44-pin TSOP-II
IS64C25616AL-12CTLA3 44-pin TSOP-II, Lead-free,
Copper Leadframe
HIGH SPEED
ORDERING INFORMATION: IS61/64C25616AL
Commercial Range: 0°C to +70°C
Speed (ns) Order Part No. Package
10 IS61C25616AL-10TL 44-pin TSOP-II, Lead-free
Industrial Range: –40°C to +85°C
Speed (ns) Order Part No. Package
10 IS61C25616AL-10KI 400-mil Plastic SOJ
IS61C25616AL-10KLI 400-mil Plastic SOJ, Lead-free
IS61C25616AL-10TI 44-pin TSOP-II
IS61C25616AL-10TLI 44-pin TSOP-II, Lead-free
LOW POWER
ORDERING INFORMATION: IS61C25616AS
Industrial Range: –40°C to +85°C
Speed (ns) Order Part No. Package
25 IS61C25616AS-25KI 400-mil Plastic SOJ
IS61C25616AS-25KLI 400-mil Plastic SOJ, Lead-free
IS61C25616AS-25TI 44-pin TSOP-II
IS61C25616AS-25TLI 44-pin TSOP-II, Lead-free
Automotive Range: –40°C to +125°C
Speed (ns) Order Part No. Package
25 IS64C25616AS-25TLA3 44-pin TSOP-II, Lead-free
Integrated Silicon Solution, Inc. — www.issi.com —
1-800-379-4774
Rev. F
10/29/03
Copyright © 2003 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time
without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to
obtain the latest version of this device specification before relying on any published information and before placing orders for products.
PACKAGING INFORMATION
400-mil Plastic SOJ
Package Code: K
Notes:
1. Controlling dimension:
millimeters.
2. BSC = Basic lead spacing
between centers.
3. Dimensions D and E1 do not
include mold flash protrusions
and should be measured from
the bottom of the package.
4. Reference document: JEDEC
MS-027.
SEATING PLANE
1
N
E1
D
E2
E
B
e
A1
A
C
A2
b
N/2+1
N/2
Millimeters Inches Millimeters Inches Millimeters Inches
Symbol Min Max Min Max Min Max Min Max Min Max Min Max
No. Leads (N) 28 32 36
A 3.25 3.75 0.128 0.148 3.25 3.75 0.128 0.148 3.25 3.75 0.128 0.148
A1 0.64 — 0.025 — 0.64 — 0.025 — 0.64 — 0.025 —
A2 2.08 — 0.082 — 2.08 — 0.082 — 2.08 — 0.082 —
B 0.38 0.51 0.015 0.020 0.38 0.51 0.015 0.020 0.38 0.51 0.015 0.020
b 0.66 0.81 0.026 0.032 0.66 0.81 0.026 0.032 0.66 0.81 0.026 0.032
C 0.18 0.33 0.007 0.013 0.18 0.33 0.007 0.013 0.18 0.33 0.007 0.013
D 18.29 18.54 0.720 0.730 20.82 21.08 0.820 0.830 23.37 23.62 0.920 0.930
E 11.05 11.30 0.435 0.445 11.05 11.30 0.435 0.445 11.05 11.30 0.435 0.445
E1 10.03 10.29 0.395 0.405 10.03 10.29 0.395 0.405 10.03 10.29 0.395 0.405
E2 9.40 BSC 0.370 BSC 9.40 BSC 0.370 BSC 9.40 BSC 0.370 BSC
e 1.27 BSC 0.050 BSC 1.27 BSC 0.050 BSC 1.27 BSC 0.050 BSC
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17

IS64C25616AL-12CTLA3-TR

Mfr. #:
Buy IS64C25616AL-12CTLA3-TR
Manufacturer:
ISSI
Description:
SRAM 4M (256Kx16) 12ns Async SRAM 5v
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet